ACM Home Page
Please provide us with feedback. Feedback
An Upper Bound for 3D Slicing Floorplans
Full text Publisher SitePublisher Site PdfPdf (788 KB)
Source Asia and South Pacific Design Automation Conference archive
Proceedings of the 2002 Asia and South Pacific Design Automation Conference table of contents
Page: 567  
Year of Publication: 2002
ISBN:0-7695-1441-3
Authors
Silke Salewski
Erich Barke  Institute of Microelectronic Circuits and Systems, University of Hannover, Germany
Sponsor
SIGDA: ACM Special Interest Group on Design Automation
Publisher
IEEE Computer Society  Washington, DC, USA
Bibliometrics
Downloads (6 Weeks): 3,   Downloads (12 Months): 15,   Citation Count: 0
Additional Information:

abstract   references   collaborative colleagues  

Tools and Actions: Review this Article  

ABSTRACT

As the impact of interconnect on IC performance and chip area in deep submicron design increases, research activities on technologies for three-dimensional integrated circuits intensify. Nevertheless, there is not much work done on the automation of 3D-layout design. In this paper we survey slicing structures for 3D floorplans. We present an upper bound for the volume of such floorplans, which shows the usability of slicing structures for three-dimensional floorplanning.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

 
1
[1] R. Zhang, K. Roy, C. K. Koh, D. B. Janes, "Stochastic Interconnect Modeling, Power Trends, and Performance Characterization of 3-D Circuits", IEEE Transactions on Electron Devices, Vol. 48, No. 4, 2001, pp. 638-652.
2
 
3
[3] A. Rahman, A. Fan, J. Chung, R. Reif, "Wire-Length Distribution of Three-Dimensional Integrated Circuits", IEEE International Interconnect Technology Conference Proceedings, 1999, pp. 233-235.
 
4
[4] K. Banerjee, S. J. Souri, P. Kapur, K. C. Saraswat, "3D-ICs: A Novel Chip Design for Improving Deep-Submicrometer Interconnect Performance and Systems-on-Chip Integration", Proceedings of the IEEE, Vol. 89, No. 5, 2001, pp. 602-633.
 
5
[5] N. Takahashi, N. Senba, Y. Shimada, I. Morisaki, K. Tokuno, "Three-Dimensional Memory Module", IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part B, Vol. 21, No. 1, 1998, pp. 15-19.
 
6
[6] T. Endoh, H. Sakuraba, K. Shinmei, F. Masuoka, "New Three Dimensional (3D) Memory Array Architecture For Future Ultra High Density DRAM", 22nd International Conference on Microelectronics (MIEL 2000), Vol. 2, pp. 447-450.
 
7
[7] K. W. Lee, T. Nakamura, T. Ono, Y. Yamada, T. Mizukusa, H. Hasimoto, K. T. Park, H. Kurino, M. Koyanagi, "Three-Dimensional Shared Memory Fabricated Using Wafer Stacking Technology", International Electron Devices Meeting 2000, Techn. Digest, pp. 165-168.
 
8
[8] H. Kurino, K. W. Lee, T. Nakamura, K. Sakuma, K. T. Park, N. Miyakawa, H. Shimazutsu, K. Y. Kim, K. Inamura, M. Koyanagi, "Intelligent Image Sensor Chip with Three Dimensional Structure", International Electron Devices Meeting 1999, Techn. Digest, pp. 879- 882.
 
9
[9] J. Burns, L. McIlrath, C. Keast, C. Lewis, A. Loomis, K. Warner, P. Wyatt, "Three-Dimensional Integrated Circuits for Low-Power, High-Bandwith Systems on a Chip", IEEE International Solid-State Circuits Conference 2001, pp. 268-269.
 
10
[10] M. Koyanagi, Y. Nakagawa, K. W. Lee, T. Nakamura, Y. Yamada, K. Inamura, K. Park, H. Kurino, "Neuromorphic Vision Chip Fabricated Using Three-Dimensional Integration Technology", IEEE International Solid-State Circuits Conference 2001, pp. 270-271.
 
11
[11] S. Chiricescu, M. Vai, "A Three-Dimensional FPGA with an Integrated Memory for In-Application Reconfiguration Data", International Symposium on Circuits and Systems 1998, Vol. 2, pp. 232-235.
 
12
[12] S. F. Al-Sarawi, D. Abbott, P. D. Franzon, "A Review of 3-D Packaging Technology", IEEE Transactions on Components, Packaging, and Manufacturing technology-Part B, Vol. 21, No. 1, 1998, pp. 2-14.
 
13
 
14
[14] A. Fan, A. Rahman, R. Reif, "Copper Wafer Bonding", Electrochemical and Solid State Letters, Vol. 2, No. 10, 1999, pp. 534-536.
 
15
[15] T. Kunio, K. Oyama, Y. Hayashi, M. Morimoto, "Three Dimensional ICs, having Four Stacked Active Device Layers", International Electron Devices Meeting 1989, pp. 837-840.
 
16
[16] G. W. Neudeck, S. Pae, J. P. Denton, T. Su, "Multiple Layers of Silicon-on-Insulator for Nanostructure Devices", Journal of Vacuum Science and Technology B 17(3), 1999, pp. 994-998.
 
17
[17] V. Subramanian, K. C. Saraswat, "High-Performance Germanium-Seeded Laterally Crystallized TFT's for Vertical Device Integration", IEEE Transactions on Electron Devices, Vol. 45, No. 9, 1998, pp. 1934-1939.
 
18
[18] M. B. Klein, S. A. Kühn, P. Ramm, W. Weber, "Thermal Analysis of Vertically Integrated Circuits", International Electron Devices Meeting 1995, Techn. Digest, pp. 487- 490.
 
19
[19] S. Im, K. Banerjee, "Full Chip Thermal Analysis of Planar (2-D) and Vertically Integrated (3-D) High Performance ICs", International Electron Devices Meeting 2000, Techn. Digest, pp. 727-730.
 
20
 
21
22
 
23
24
 
25
Collaborative Colleagues:
Silke Salewski: colleagues
Erich Barke: colleagues