ACM Home Page
Please provide us with feedback. Feedback
Timing verification of dynamically reconfigurable logic for the xilinx virtex FPGA series
Full text PdfPdf (610 KB)
Source International Symposium on Field Programmable Gate Arrays archive
Proceedings of the 2002 ACM/SIGDA tenth international symposium on Field-programmable gate arrays table of contents
Monterey, California, USA
Session: Synthesis, Verification and Test table of contents
Pages: 127 - 135  
Year of Publication: 2002
ISBN:1-58113-452-5
Authors
Ian Robertson  University of Strathclyde, Glasgow, United Kingdom
James Irvine  University of Strathclyde, Glasgow, United Kingdom
Patrick Lysaght  University of Strathclyde, Glasgow, United Kingdom
David Robinson  Institute for System Level Integration, The Alba Centre, Kirkton Campus, Livingston, Scotland
Sponsor
SIGDA: ACM Special Interest Group on Design Automation
Publisher
ACM  New York, NY, USA
Bibliometrics
Downloads (6 Weeks): 3,   Downloads (12 Months): 30,   Citation Count: 3
Additional Information:

abstract   references   cited by   index terms   collaborative colleagues  

Tools and Actions: Request Permissions Request Permissions    Review this Article  
DOI Bookmark: Use this link to bookmark this Article: http://doi.acm.org/10.1145/503048.503068
What is a DOI?

ABSTRACT

This paper reports on a method for extending existing VHDL design and verification software available for the Xilinx Virtex series of FPGAs. It allows the designer to apply standard hardware design and verification tools to the design of dynamically reconfigurable logic (DRL). The technique involves the conversion of a dynamic design into multiple static designs, suitable for input to standard synthesis and APR tools. For timing and functional verification after APR, the sections of the design can then be recombined into a single dynamic system. The technique has been automated by extending an existing DRL design tool named DCSTech, which is part of the Dynamic Circuit Switching (DCS) CAD framework. The principles behind the tools are generic and should be readily extensible to other architectures and CAD toolsets. Implementation of the dynamic system involves the production of partial configuration bitstreams to load sections of circuitry. The process of creating such bitstreams, the final stage of our design flow, is summarized.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

 
1
 
2
D. Robinson and P. Lysaght, "Methods of Exploiting Simulation Technology for Simulating the Timing of Dynamically Reconfigurable Logic", IEE Proceedings- Computers and Digital Techniques 147: (3) 175-180 May 2000.
3
 
4
 
5
 
6
 
7
 
8
 
9
J. Hogg, S. Singh and M. Sheeran, "New HDL Research Challenges posed by Dynamically Reprogrammable Hardware", The Third Asia Pacific Conference on Hardware Description Languages, Bangalore, India, January 1996.
 
10
 
11
 
12
 
13
G. Brebner, "CHASTE: a Hardware/Software Co-design Testbed for the Xilinx XC6200", Reconfigurable Architectures Workshop, Geneva, Switzerland, April 1997.
 
14
S. Guccione, D. Levi and P. Sundararajan, "JBits: Java based interface for reconfigurable computing", Military and Aerospace Applications of Programmable Devices and Technologies Conference, 1999.
 
15
 
16
Xilinx Inc., "Xilinx Alliance 3.1i Modular Design", version 1.2, April 20, 2001.
 
17
Xilinx Inc., "Virtex Series Configuration Architecture User Guide", version 1.5, Sept. 27, 2000.
 
18


Collaborative Colleagues:
Ian Robertson: colleagues
James Irvine: colleagues
Patrick Lysaght: colleagues
David Robinson: colleagues