ACM Home Page
Please provide us with feedback. Feedback
High-level synthesis under multi-cycle interconnect delay
Full text PdfPdf (93 KB)
Source Asia and South Pacific Design Automation Conference archive
Proceedings of the 2001 Asia and South Pacific Design Automation Conference table of contents
Yokohama, Japan
Page: 662  
Year of Publication: 2001
ISBN:0-7803-6634-4
Authors
Jinhwan Jeon  School of EECS, Seoul Nat'l University, Seoul 151-742, Korea
Daehong Kim  School of EECS, Seoul Nat'l University, Seoul 151-742, Korea
Dongwan Shin  Dept. of ICS, University of California, Irvine, CA
Kiyoung Choi  School of EECS, Seoul Nat'l University, Seoul 151-742, Korea
Sponsors
SIGDA: ACM Special Interest Group on Design Automation
IPSJ : Information Processing Society of Japan
IEEE HK CAS : IEEE HK CAS and Comm. Joint Chapter
IEICE : Inst of Electronics, Info & Communication Engineers
Publisher
ACM  New York, NY, USA
Bibliometrics
Downloads (6 Weeks): 7,   Downloads (12 Months): 34,   Citation Count: 13
Additional Information:

abstract   references   cited by   index terms   collaborative colleagues  

Tools and Actions: Review this Article  
DOI Bookmark: Use this link to bookmark this Article: http://doi.acm.org/10.1145/370155.370576
What is a DOI?

ABSTRACT

As process technology goes into deep submicron range, interconnect delay becomes dominant among overall system delay, occupying most of the system clock cycle time. Interconnect delay is now a crucial factor that needs to be considered even during high-level synthesis. In this paper, we propose a concurrent scheduling and binding algorithm that takes interconnect delay into account. We first define our distributed target architecture, which minimizes the effect of interconnect delay on clock cycle time. We no longer assume that interconnect delay between functional units is a part of one clock cycle. Interconnect delay can span over multiple clock cycles. We incorporate the concept of multi-cycle interconnect delay into scheduling and binding process, to reduce the critical path length and therefore the system latency. We show that by introducing interconnect delay, we can obtain latency improvement of up to 54 % and of 37% on the average.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

 
1
 
2
E. G. Friedman, "Substrate Coupling and Interconnect Noise in Mixed-Signal and High Speed Digital ICs," IEEE CAS Workshop on Mixed-Signal Integrated Circuit Design, Dec., 1999.
3
 
4
 
5
International Technology Roadmap for Semiconductors, Semiconductor Industry Association, 1999.
 
6
 
7
S. Park and K. Choi, "Latency minimisation by system clock optimisation," IEE Electronics Letters, vol. 34, pp. 862-864, 1998.
8
 
9
S. Park, K. Kim, H. Chang, J. Jeon, and K. Choi, "Backward- Annotation of Post Layout Delay Information into High-Level Synthesis Process for Performance Optimization," Proc. of 6th International Conference on VLSI and CAD, pp. 25-28, Oct. 1999.
 
10
 
11
R. Camposano, "Path-Based Scheduling for Synthesis," IEEE Transactions on Computer Aided Design, pp. 154-157, 1996.
12
 
13
 
14
M. McFarland, "A Fast Floor Planning Algorithm for Architectureal Evaluation," Proceedings of the International Conference on Computer Design, pp. 96-99, Oct. 1989.
 
15
R. Camposano, "Path-Based Scheduling for Synthesis," IEEE Transactions on CAD, vol. 10, no. 1, pp. 85-93, Jan. 1991.

CITED BY  13

Collaborative Colleagues:
Jinhwan Jeon: colleagues
Daehong Kim: colleagues
Dongwan Shin: colleagues
Kiyoung Choi: colleagues