Representations for Rigid Solids: Theory, Methods, and Systems

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Representations for Rigid Solids: Theory, Methods, and Systems

Full text

Pdf (2.47 MB)

Source

ACM Computing Surveys (CSUR) archive
Volume 12 , Issue 4 (December 1980) table of contents

Pages: 437 - 464

Year of Publication: 1980

ISSN:0360-0300

Author

Aristides G. Requicha

Production Automation Project, College of Engineering and Applied Science, The University of Rochester, Rochester, New York

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 32, Downloads (12 Months): 185, Citation Count: 158

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Request Permissions Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/356827.356833 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	AGIN76	AGIN, G. J., AND BINFORD, T. O. "Computer descriptions of curved objects," IEEE Trans. Comput. C-25, 4 (April 1976), 439-449.
	AGOS76	AGOSTON, M. K. Algebraw topology, Marcel Dekker, New York, 1976.
	AHO74	Alfred V. Aho , John E. Hopcroft, The Design and Analysis of Computer Algorithms, Addison-Wesley Longman Publishing Co., Inc., Boston, MA, 1974
	ANSI78	"Digital representation of physical object shapes," Proposed American Natlona\| Standard ANSI Y14.26 1, American Society of Mechanical Engineers, New York, 1978.
	ARNO79	ARNON, D. "A cellular decomposition algorithm for seml-algebram sets," Tech Rep. 353, Computer Scmnce Dep., Umv. Wisconsin, Madison, June 1979.
	BADL78	Norman Badler , Ruzena Bajcsy, Three-dimensional representations for computer graphics and computer vision, ACM SIGGRAPH Computer Graphics, v.12 n.3, p.153-160, August 1978
	BADL79	BADLER, N., O'ROURKE, J., AND TOLTZIS, H. "A spherical representation of a human body for visualizing movement," Proc. IEEE 67, 10 (Oct. 1979), 1397-1403.
	BAER77	BAER, A., EASTMAN, C., AND HENRION, M. "A survey of geometric modeling," Res. Rep. 66, Institute of Physical Planning, Carneg, e-MeUon Univ., Pittsburgh, Pa., March 1977.
	BARN74	Robert E. Barnhill , Richard F. Riesenfeld, Computer Aided Geometric Design; Proceedings of a Conference Held at the University of Utah, Salt Lake City, Utah, March 18-21, 1974, Academic Press, Inc., Orlando, FL, 1974
	BAUM74	BAUMGART, B G "Geometric modelling for computer vision," Rep. STAN-CS-74- 463, Stanford Artificial Intelhgence Lab., Stanford Univ., Stanford, Calif., 1974.
	BERN75	BERNASCON, Y J., AND BRUN, J. M. "Automated aids for the design of mechanical parts," Tech. Paper MS75-508, Society of Manufacturing Engineers, Dearborn, Mich., 1975.
	BORK78	Harold J. Borkin , Jonn F. McIntosh , James A. Turner, The development of three-dimensional spatial modeling techniques for the construction planning of nuclear power plants, ACM SIGGRAPH Computer Graphics, v.12 n.3, p.341-347, August 1978
	BOYS78	BOYSE, J. W. "Prelnninary design for a geometric modeller," Res. Pub. GMR-2768, Computer Science Dep., General Motors Research Labs., Warren, Mich., July 1978.
	BOYS79a	John W. Boyse, Interference detection among solids and surfaces, Communications of the ACM, v.22 n.1, p.3-9, Jan. 1979 [doi>10.1145/359046.359048]
	BOYS79b	BoYsE, J.W. "Data structure for a solid modeller," Res. Pub. GMR-2933, Computer Science Dep., General Motors Research Labs, Warren, Mich., March 1979.
	BRAI73	BRAID, I. C. "Designing with volumes," Ph.D. Dissertation, Univ. Cambridge, England, 1973.
	BRAI75a	I. C. Braid, The synthesis of solids bounded by many faces, Communications of the ACM, v.18 n.4, p.209-216, April 1975 [doi>10.1145/360715.360727]
	BRAI75b	BRAID, I C. "Six systems for shape design and representation--A review," in Proc. CAM-I's Int. CAM Semmar, CAM-I, Inc., Bournemouth, England, April 1975, pp. 60- 67.
	BRAI78a	BRAID, I.C. "New directions in geometric modelling," in Proc Geometrtc Modehng ProJect Mtg, CAM-I, Inc., St. Louis, Mo., March 1978.
	BRAI78b	BRAID, I. C., HILLYARD, R. C., AND STROUD, I.A. "Stepwlse construetmn of polyhedra in geometric modelling," C.A.D. Group Document No. 100, Umv. Cambridge, England, Oct. 1978.
	BROO79	BROOKS, R. A., GREINER, R., AND BIN- FORD, T. O. "The ACRONYM modelbased vision system," in Proc. 6th Int. Conf. on Art~ficml Intelhgence, vol. 1, Tokyo, Japan, Aug. 1979, pp 105-113.
	BROW78	C. M. Brown , A. A. G. Requicha , H. B. Voelcker, Geometric Modelling Systems for mechanical design and manufacturing, Proceedings of the 1978 annual conference, p.770-778, January 1978 [doi>10.1145/800178.810126]
	BROW79	BROWN, C. M., AND VOELCKER, H B. "The PADL-2 project," in Proc 7th NSF Conf. on Productmn Research and Technology, Ithaca, N.Y., Sept. 1979, pp. F1-F6.
	CART79	CARTER, W. A. (ED.) Geometric Modell. mg Seminar, CAM-I, Inc., Bournemouth, England, Nov 1979.
	CLOW71	CLOWES, M. "On seeing things," Art~f. Intell. 2, 1 (1971), 79-116.
	COHE79	Jacques Cohen , Timothy Hickey, Two Algorithms for Determining Volumes of Convex Polyhedra, Journal of the ACM (JACM), v.26 n.3, p.401-414, july 1979 [doi>10.1145/322139.322141]
	EAST77	Charles Eastman , Max Henrion, Glide: a language for design information systems, ACM SIGGRAPH Computer Graphics, v.11 n.2, p.24-33, Summer 1977
	EAST79	EASTMAN, C. M., AND WEILER, K. "Geometric modelling using the Euler operators," Res. Rep. 78, Instttute of Physical Planning, Carnegie-Mellon Univ., Pittsburgh, Pa., Feb. 1979.
	ENGE73	ENGELI, M.E. "A language for 3D graphics applications," m Int. Computtng Symposture, A. Gunther et al. (Eds.), North- Holland, Amsterdam, 1973, pp. 459-466.
	FUCH77	H. Fuchs , Z. M. Kedem , S. P. Uselton, Optimal surface reconstruction from planar contours, Communications of the ACM, v.20 n.10, p.693-702, Oct. 1977 [doi>10.1145/359842.359846]
	GALL73	GALLAGHER, C. C., AND KNIGHT, VV'. A. Group technology, Butterworths, London, 1973.
	GOLD71	GOLDSTEIN, R. A., AND NAGEL, R. "3-D visual simulatlon," Stmulatmn 16,1 (1971), 25-31
	GOLD79	GOLDSTEIN, R., AND MALIN, L. "3D modelling with the Synthavlslon system," in Proc. 1st Ann. Conf. Computer Graphtcs ~n CAD~CAM Systems, Cambridge, Mass, April 1979, pp. 244-247
	GROS76	GROSSMAN, D.D. "Procedural representation of three-dunenslonal objects," IBM J. Res. Dev 20 (Nov. 1976), 582-589.
	HERB78	Don Herbison-Evans, NUDES 2: A numeric utility displaying ellipsoid solids, version 2, ACM SIGGRAPH Computer Graphics, v.12 n.3, p.354-356, August 1978
	HIRO74	HIRONAKA, H. "Triangulations of algebraic sets," in Algebratc Geometry, AR- CA TA 1974, Proc. of Symposia tn Pure Mathemattcs, American Mathematical Sooety, Providence, R.I., 1975.
	HOSA74	HOSAKA, M., KIMURA, F., AND KAKISHITA, N. "A unified method for processing polyhedra," in Informatmn processing '74, North-Holland, Amsterdam, 1974, pp. 768- 772.
	HOSA77	HOSAKA, M., AND KIMURA, F. "An interactive geometrical design system with handwriting input," in Information processmg '77, B. Gilchrist (Ed.), North-Holland, Amsterdam, 1977, pp. 167-172.
	HUFF71	HUFFMAN, D. "Impossible objects as nonsense sentences," m Machine mtelh. gence, vol. 6, B. Meltzer and D. Mmhie (Eds), Edinburgh University Press, Edinburgh, Scotland, 1971
	IITR67	IIT RESEARCH INSTITUTE APT part programmmg, McGraw-Hill, New York, 1967.
	KURA76	KURATOWSKI, K., AND MOSTOWSKI, A. Set theory, North-Holland,-Amsterdam, 1976.
	LANI73	LANING, J. H., LYNDE, D. A., AND MOR- EGGIA, V. "SHAPES user's manual," Charles Stark Draper Lab., Cambridge, Mass., May 1973.
	LANI79	LANING, J. H., AND MADDEN, S. J "Capabilities of the SHAPES system for computer aided mechamcal design," m Proc. 1st Ann. Conf. Computer Graphtcs m CAD~CAM Systems, Cambridge, Mass., April 1979, pp. 223-231
	LEE76	D. T. Lee , F. P. Preparata, Location of a point in a planar subdivision and its applications, Proceedings of the eighth annual ACM symposium on Theory of computing, p.231-235, May 03-05, 1976, Hershey, Pennsylvania, United States [doi>10.1145/800113.803653]
	LEE80	LEE, Y. T, AND REQUICHA, A. A. G. "Algorithms for computing the volume and other integral properties of solid objects," Tech. Memo. 35, Production Automation Project, Univ. Rochester, Rochester, N.Y., Feb. 1980.
	MARC74	MARCH, L., AND STEADMAN, P. The geometry of enwronment, M.I.T. Press, Cambridge, Mass., 1974.
	MARK80	MARKOWSKY, G., AND WESLEY, M. A. "Fleshing out wireframes," Res. Rep. RC 8124, IBM Thomas J. Watson Research Center, Yorktown Heights, N.Y., 1980.
	MITC78	MITCHELL, W. J., AND OLIVERSON, M. "Computer representation of threedimensional structures for CAEADS," Rep. CERL-TR-P-86, Construction Engineering Research Lab., U.S. Army Corps of Engineers, Champaign, Ill., 1978
	NOWA80	Horst Nowacki, Curve and Surface Generation and Fairing, Computer Aided Design: Modelling, Systems Engineering, CAD-Systems - CREST Advanced Course, p.137-176, September 08-19, 1980
	OKIN73	OKINO, N., KAKAZU, Y., AND KUBO, H. "TIPS-l" Technical information processing system foe computer-aided design, drawing and manufacturing," in Computer languages for numerical control, J. Hatvany (Ed.), North-Holland, Amsterdam, 1973, pp. 141-150.
	OKIN78	OKINO, N., ET AL. "TIPS-l," Institute of Precision Engineering, Hokkaido Univ., Sapporo, Japan, 1978.
	OYAK76	OYAKE, I., AND SHU, H. "Object synthesis for design/manufacturing," in Proc 13th NC Socwty Ann. Mtg. and Tech. Conf., Cincinnati, Ohm, March 1976, pp. 541-553.
	PARE77	Richard E. Parent, A system for sculpting 3-D data, ACM SIGGRAPH Computer Graphics, v.11 n.2, p.138-147, Summer 1977
	POPP75	POPPLESTONE, R. J, BROWN, C M., AM- BLER, A. P, AND CRAWFORD, G. F. "Forming models of plane-and-cylinder faceted bodies from light stripes," m Proc. 4th Int. Joint Conf. Arttficial Intelhgence, Tbilisi, Georgia, U.S.S.R., Sept. 1975, pp. 664-668.
	PREI79	Kenneth Preiss, A procedure for checking the topological consistency of a 2-D or 3-D finite element mesh, Proceedings of the 16th Conference on Design automation, p.200-206, June 25-27, 1979, San Diego, CA, United States
	REDD78	REDDY, D. R., AND RUBIN, S. "Representation of three-dimensional objects," Rep. CMU-CS-78-113, Dep Computer Science, Carnegie-Mellon Univ., Pittsburgh, Pa., April 1978.
	REQU77a	REQUICHA, A. A.G. "Part and assembly description languages i: Dimensioning and tolerancing," Tech. Memo. 19, Production Automation Project, Umv Rochester, Rochster, N.Y., May 1977.
	REQU77b	REQUICHA, A. A. G. "Mathematmal models of rigid solid objects," Tech. Memo. 28, Production Automation Project, Univ. Rochester, Rochster, N.Y., Nov. 1977
	REQU77c	REQUICHA, A. A. G., AND VOELCKER, H. B. "Constructive solid geometry," Tech. Memo. 25, Production Automation Project, Univ. Rochester, Rochester, N.Y., Nov 1977.
	REQU78	REQUICHA, A. A. G., AND TILOVE, R. B. "Mathematical foundations of constructive solid geometry. General topology of regular closed sets," Tech. Memo. 27, Production Automation Project, Univ Rochester, Rochester, N.Y., March 1978.
	REQU80	REQUmHA, A. A G. "Representations of rigid solid objects," in Computer aided design, lecture notes on computer sctence, no. 89, J. Encarnacao (Ed.), Springer-Verlag, New York, 1980
	SHAM78	Michael Ian Shamos, Computational geometry., 1978
	SCHU76	SCHUSTER, R. "System und Sprache zur Behandlung graphischer Information m rechnergestutzten Entwurf," Rep. KFK- 2305, Kernforschungszentrum, Karlsruhe, West Germany, 1976.
	SEIF78	SEIFERT, H., BARGELE, N., AND FRITSCHE, B. "Different ways to design three-dimensional representations of engineering parts with PROREN2," in Proc. Conf. Interactwe Techntques ~n Computer Atded Design, Bologna, Italy, 1978, pp. 335-343.
	SHU76	SHy, H "Geometric modeling for mechanical parts," in Proc 4th NSF Conf Productmn Research and Technology, Chicago, Ill, Dec. 1976, pp. 10-15
	SIMO69	Herbert A. Simon, The sciences of the artificial (3rd ed.), MIT Press, Cambridge, MA, 1996
	SPUR76	SPUR, G., AND GAUSEMEIER, J. "Processing of workpiece information for producing engineering drawings," in Proc. 16th Int. Machtne Tool Destgn and Re. search Conf., Manchester, England, 1976, pp. 17-21.
	SPUR78	SPUR, G. "Status and further development of the geometric modelling system COMPAC," m Proc. Geometrtc Modelhng Project Mtg., CAM-I, Inc., St Louis, Mo, March 1978.
	TILO80a	TILOVE, R.B. "Set membership classification: A unified approach to geometrm intersection problems," IEEE Trans Comput C-29, 10 (Oct. 1980), 874-883.
	TILO80b	T;LOVE, R. B., AND REQUICHA, A. A. G. "Closure of Boolean operations on geometric entitles," Comput. Azded Des. 12, 5 (Sept. 1980) 219-220.
	VOEL74a	VOELCKER, H. B., MIDDLEDITCH, A. E., ZUCKERMAN, P. R, FISHER, W. B., NEL- SON, T. S., REQUICHA, A. A G., AND SHO- PInO, J.E. "Discrete part manufacturing Theory and practice," Part I, Tech. Rep. 1, Production Automation Project, Univ Rochester, Rochester, N Y., Dec. 1974.
	VOEL74b	VOELCKER, H. B., REQUICHA, A A. G., HARTQUIST, E. E., FISHER, W. B., SHO- PIRO, J. E., AND BIRRELL, N.K. "An introduction to PADL. Characteristics, status, and rationale," Tech. Memo. 22, Productmn Automatmn Project, Univ. Rochester, Rochester, N.Y., Dec. 1974
	VOEL77	VOELCKER, H. B. AND REQUICHA, A. A. G. "Geometric modelling of mechanical parts and processes," IEEE Comput., 10, 12 (Dec. 1977), 48-57.
	VOEL78	H. Voelcker , A. Requicha , E. Hartquist , W. Fisher , J. Metzger , R. Tilove , N. Birrell , W. Hunt , G. Armstrong , T. Check , R. Moote , J. McSweeney, The PADL-1.0/2 system for defining and displaying solid objects, ACM SIGGRAPH Computer Graphics, v.12 n.3, p.257-263, August 1978
	VOEL80	VOELCKER, H. B., REQUICHA, A. A. G. "Boundary evaluatmn procedures for objects defined wa constructive sohd geometry," Tech. Memo. 26, Production Automation Project, Univ. Rochester, Rochester, N.Y., 1980.
	WALT75	WALTZ, D "Understanding line drawings of scenes with shadows," in The psychology of computer v~smn, P. H. Winston (Ed), McGraw-Hill, New York, 1975, pp. 19-91
	WESL80a	WELSEY, M. A., LOZANO-PEREZ, T., LIE- BERMAN, L. T., LAVIN, M. A., AND GROSS- MA~, D D. "A geometric modelhng system for automated mechanical assembly," IBM J Res. Dev. 24, 1 (Jan 1980), 64-74.
	WESL80b	Michael A. Wesley, Construction and Use of Geometric Models, Computer Aided Design: Modelling, Systems Engineering, CAD-Systems - CREST Advanced Course, p.79-136, September 08-19, 1980
	WOO79	Woo, T. C., AND POSHADLO, R. F. "A feature oriented design modification system," m Proc. 1st Ann. Conf. Computer Graphws ~n CAD~CAM Systems, Cambridge, Mass, April 1979.
	YESS78	Chris I. Yessios, A notation and system for 3-D constructions, Proceedings of the 15th conference on Design automation, p.125-132, June 19-21, 1978, Las Vegas, Nevada, United States

CITED BY 158

	P. Lienhardt, Subdivisions of n-dimensional spaces and n-dimensional generalized maps, Proceedings of the fifth annual symposium on Computational geometry, p.228-236, June 05-07, 1989, Saarbruchen, West Germany
	Frederik W. Jansen, Depth-order point classification techniques for CSG display algorithms, ACM Transactions on Graphics (TOG), v.10 n.1, p.40-70, Jan. 1991
	Vadim Shapiro , Donald L. Vossler, Separation for boundary to CSG conversion, ACM Transactions on Graphics (TOG), v.12 n.1, p.35-55, Jan. 1993
	Ingemar Hulthage , Mark S. Fox , Michael D. Rychener , Martha L. Farinacci, The Architecture of ALADIN: A Knowledge-Based Approach to Alloy Design, IEEE Expert: Intelligent Systems and Their Applications, v.5 n.4, p.56-63, 65-73, August 1990
	Ari Rappoport, Geometric modeling: a new fundamental framework and its practical implications, Proceedings of the third ACM symposium on Solid modeling and applications, p.31-41, May 17-19, 1995, Salt Lake City, Utah, United States
	Yong Tsui Lee , Aristides A. G. Requicha, Algorithms for computing the volume and other integral properties of solids. II. A family of algorithms based on representation conversion and cellular approximation, Communications of the ACM, v.25 n.9, p.642-650, Sept 1982
	Henning Østergård Hansen , Niels Jørgen Christensen, A model for n-dimensional boundary topology, Proceedings on the second ACM symposium on Solid modeling and applications, p.65-73, May 19-21, 1993, Montreal, Quebec, Canada
	J. P. Menon, An introduction to constructive shell representations for free-form surfaces and solids, Proceedings on the second ACM symposium on Solid modeling and applications, p.23-34, May 19-21, 1993, Montreal, Quebec, Canada
	Yong Tsui Lee , Aristides A. G. Requicha, Algorithms for computing the volume and other integral properties of solids. I. known methods and open issues, Communications of the ACM, v.25 n.9, p.635-641, Sept 1982
	Jack Goldfeather , Jeff P M Hultquist , Henry Fuchs, Fast constructive-solid geometry display in the pixel-powers graphics system, ACM SIGGRAPH Computer Graphics, v.20 n.4, p.107-116, Aug. 1986
	M. Benouamer , D. Michelucci , B. Peroche, Error-free boundary evaluation using lazy rational arithmetic: a detailed implementation, Proceedings on the second ACM symposium on Solid modeling and applications, p.115-126, May 19-21, 1993, Montreal, Quebec, Canada
	Jarek Rossignac , David Cardoze, Matchmaker: manifold BReps for non-manifold r-sets, Proceedings of the fifth ACM symposium on Solid modeling and applications, p.31-41, June 08-11, 1999, Ann Arbor, Michigan, United States
	J. L. Ellis , G. Kedem , T. C. Lyerly , D. G. Thielman , R. J. Marisa , J. P. Menon , H. B. Voelcker, The Ray casting engine and Ray representatives, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.255-267, June 05-07, 1991, Austin, Texas, United States
	David Dobkin , Leonidas Guibas , John Hershberger , Jack Snoeyink, An efficient algorithm for finding the CSG representation of a simple polygon, ACM SIGGRAPH Computer Graphics, v.22 n.4, p.31-40, Aug. 1988
	Hanan Samet, The Quadtree and Related Hierarchical Data Structures, ACM Computing Surveys (CSUR), v.16 n.2, p.187-260, June 1984
	Srinivas Raghothama , Vadim Shapiro, Consistent updates in dual representation systems, Proceedings of the fifth ACM symposium on Solid modeling and applications, p.65-75, June 08-11, 1999, Ann Arbor, Michigan, United States
	Jean-François Dufourd, An OBJ3 functional specification for boundary representation, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.61-72, June 05-07, 1991, Austin, Texas, United States
	I. C. You , C. N. Chu , R. L. Kashyap, Knowledge representation and control structure based on three-dimensional symbolic skeletons for CAD/CAM integration, Proceedings of the 3rd international conference on Industrial and engineering applications of artificial intelligence and expert systems, p.357-364, June 1990, Charleston, South Carolina, United States
	Robert B. Tilove, A null-object detection algorithm for constructive solid geometry, Communications of the ACM, v.27 n.7, p.684-694, July 1984
	Larry Lichten, The emerging technology of CAD/CAM, Proceedings of the 1984 annual conference of the ACM on The fifth generation challenge, p.236-241, January 1984
	Abbas Edalat , André Lieutier, Foundation of a computable solid modeling, Proceedings of the fifth ACM symposium on Solid modeling and applications, p.278-284, June 08-11, 1999, Ann Arbor, Michigan, United States
	Vadim Shapiro , Donald L. Vossler, What is a parametric family of solids?, Proceedings of the third ACM symposium on Solid modeling and applications, p.43-54, May 17-19, 1995, Salt Lake City, Utah, United States
	Jai P. Menon , Herbert B. Voelcker, On the completeness and conversion of ray representations of arbitrary solids, Proceedings of the third ACM symposium on Solid modeling and applications, p.175-286, May 17-19, 1995, Salt Lake City, Utah, United States
	Horea T. Ilies , Vadim Shapiro, UNSWEEP: formulation and computational properties, Proceedings of the fourth ACM symposium on Solid modeling and applications, p.155-167, May 14-16, 1997, Atlanta, Georgia, United States
	C. W. A. M. van Overveld , B. Wyvill, Phong normal interpolation revisited, ACM Transactions on Graphics (TOG), v.16 n.4, p.397-419, Oct. 1997
	William C. Thibault , Bruce F. Naylor, Set operations on polyhedra using binary space partitioning trees, ACM SIGGRAPH Computer Graphics, v.21 n.4, p.153-162, July 1987
	Martti Mäntylä, Boolean operations of 2-manifolds through vertex neighborhood classification, ACM Transactions on Graphics (TOG), v.5 n.1, p.1-29, Jan. 1986
	Ari Rappoport, The n-dimensional extended convex differences tree (ECDT) for representing polyhedra, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.139-147, June 05-07, 1991, Austin, Texas, United States
	Jaroslaw R. Rossignac, Constraints in constructive solid geometry, Proceedings of the 1986 workshop on Interactive 3D graphics, p.93-110, January 1987, Chapel Hill, North Carolina, United States
	Di Wu , Radha Sarma, Dynamic segmentation and incremental editing of boundary representations in a collaborative design environment, Proceedings of the sixth ACM symposium on Solid modeling and applications, p.289-300, May 2001, Ann Arbor, Michigan, United States
	Beat Brüderlin, Constructing three-dimensional geometric objects defined by constraints, Proceedings of the 1986 workshop on Interactive 3D graphics, p.111-129, January 1987, Chapel Hill, North Carolina, United States
	Martti Mäntylä, An inversion algorithm for geometric models, ACM SIGGRAPH Computer Graphics, v.16 n.3, p.51-59, July 1982
	Leila De Floriani , Bianca Falcidieno, A hierarchical boundary model for solid object representation, ACM Transactions on Graphics (TOG), v.7 n.1, p.42-60, Jan. 1988
	James T. Kajiya, New techniques for ray tracing procedurally defined objects, ACM SIGGRAPH Computer Graphics, v.17 n.3, p.91-102, July 1983
	R. E. da Silva , K. L. Wood , J. J. Beaman, An algebraic approach to geometric query processing in CAD/CAM applications, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.73-86, June 05-07, 1991, Austin, Texas, United States
	André Guéziec , Gabriel Taubin , Francis Lazarus , William Horn, Converting sets of polygons to manifold surfaces by cutting and stitching, Proceedings of the conference on Visualization '98, p.383-390, October 18-23, 1998, Research Triangle Park, North Carolina, United States
	Michael Karasick , David Strip, Intersecting solids on a massively parallel processor, ACM Transactions on Graphics (TOG), v.14 n.1, p.21-57, Jan. 1995
	Vinod Kumar , Debasish Dutta, An approach to modeling multi-material objects, Proceedings of the fourth ACM symposium on Solid modeling and applications, p.336-345, May 14-16, 1997, Atlanta, Georgia, United States
	Nigel Stewart , Geoff Leach , Sabu John, An improved z-buffer CSG rendering algorithm, Proceedings of the ACM SIGGRAPH/EUROGRAPHICS workshop on Graphics hardware, p.25-30, August 31-September 01, 1998, Lisbon, Portugal
	Ari Rappoport , Steven Spitz, Interactive Boolean operations for conceptual design of 3-D solids, Proceedings of the 24th annual conference on Computer graphics and interactive techniques, p.269-278, August 1997
	Jovan Zagajac, A fast method for estimating discrete field values in early engineering design, Proceedings of the third ACM symposium on Solid modeling and applications, p.420-430, May 17-19, 1995, Salt Lake City, Utah, United States
	Martti Mäntylä , Markku Tamminen, Localized set operations for solid modeling, ACM SIGGRAPH Computer Graphics, v.17 n.3, p.279-288, July 1983
	Alberto Paoluzzi , Valerio Pascucci , Michele Vicentino, Geometric programming: a programming approach to geometric design, ACM Transactions on Graphics (TOG), v.14 n.3, p.266-306, July 1995
	A. Aguilera , D. Ayala, Orthogonal polyhedra as geometric bounds in constructive solid geometry, Proceedings of the fourth ACM symposium on Solid modeling and applications, p.56-67, May 14-16, 1997, Atlanta, Georgia, United States
	D. L. Dewhirst , R. C. Hillyard, Application of volumetric modeling to mechanical design and analysis, Proceedings of the 18th conference on Design automation, p.171-178, June 29-July 01, 1981, Nashville, Tennessee, United States
	Vadim Shapiro , Igor Tsukanov, Meshfree automation of engineering analysis, From geometric modeling to shape modeling, Kluwer Academic Publishers, Norwell, MA, 2002
	Ari Rappoport, The generic geometric complex (GGC): a modeling scheme for families of decomposed pointsets, Proceedings of the fourth ACM symposium on Solid modeling and applications, p.19-30, May 14-16, 1997, Atlanta, Georgia, United States
	Y. T. Lee , A. Pennington , N. K. Shaw, Automatic finite-element mesh generation from geometric models—A point-based approach, ACM Transactions on Graphics (TOG), v.3 n.4, p.287-311, Oct. 1984
	Narendra Ahuja , B. J. Schachter, Image Models, ACM Computing Surveys (CSUR), v.13 n.4, p.373-397, Dec. 1981
	Srinivas Raghothama , Vadim Shapiro, Boundary representation deformation in parametric solid modeling, ACM Transactions on Graphics (TOG), v.17 n.4, p.259-286, Oct. 1998
	Atul Sudhalkar , Levent Gürsöz , Fritz Prinz, Continuous skeletons of discrete objects, Proceedings on the second ACM symposium on Solid modeling and applications, p.85-94, May 19-21, 1993, Montreal, Quebec, Canada
	Alison McKay , M. Susan Bloor , Alan de Pennington, A Framework for Product Data, IEEE Transactions on Knowledge and Data Engineering, v.8 n.5, p.825-838, October 1996
	Srinivas Raghothama , Vadim Shapiro, Necessary conditions for boundary representation variance, Proceedings of the thirteenth annual symposium on Computational geometry, p.77-86, June 04-06, 1997, Nice, France
	Y. C. Lee , K. S. Fu, Integration of solid modeling and data base management for CAD/CAM, Proceedings of the 20th conference on Design automation, p.367-373, June 27-29, 1983, Miami Beach, Florida, United States
	Hanan Samet , Markku Tamminen, Bintrees, CSG trees, and time, ACM SIGGRAPH Computer Graphics, v.19 n.3, p.121-130, Jul. 1985
	Alfons Kemper , Mechtild Wallrath, An analysis of geometric modeling in database systems, ACM Computing Surveys (CSUR), v.19 n.1, p.47-91, March 1987
	Hiroaki Chiyokura , Fumihiko Kimura, Design of solids with free-form surfaces, ACM SIGGRAPH Computer Graphics, v.17 n.3, p.289-298, July 1983
	James T. Kajiya, New Techniques for Ray Tracing Procedurally Defined Objects, ACM Transactions on Graphics (TOG), v.2 n.3, p.161-181, July 1983
	L. De Floriani, A graph based approach to object feature recognition, Proceedings of the third annual symposium on Computational geometry, p.100-109, June 08-10, 1987, Waterloo, Ontario, Canada
	Shiaofen Fang , Duoduo Liao, Fast CSG voxelization by frame buffer pixel mapping, Proceedings of the 2000 IEEE symposium on Volume visualization, p.43-48, October 09-10, 2000, Salt Lake City, Utah, United States
	Jean-François Dufourd , Sven Luther, Parametrizing geometric objects using λ-calculus, Proceedings of the 18th spring conference on Computer graphics, April 24-27, 2002, Budmerice, Slovakia
	Valerio Pascucci , Vincenzo Ferrucci , Alberto Paoluzzi, Dimension-independent convex-cell based HPC: representation scheme and implementation issues, Proceedings of the third ACM symposium on Solid modeling and applications, p.163-174, May 17-19, 1995, Salt Lake City, Utah, United States
	Abbas Edalat , André Lieutier, Foundation of a computable solid modelling, Theoretical Computer Science, v.284 n.2, p.319-345, 28 July 2002
	Jim Foley, Editorial: Looking back. Looking ahead, ACM Transactions on Graphics (TOG), v.10 n.4, p.321-322, Oct. 1991
	Amitabha Mukerjee, Qualitative geometric design, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.503-514, June 05-07, 1991, Austin, Texas, United States
	Terence M. Burke , Chaman L. Sabharwal, Data parallel implementation of surface-to-surface intersection, Proceedings of the 1996 ACM symposium on Applied Computing, p.353-357, February 17-19, 1996, Philadelphia, Pennsylvania, United States
	Sargur N. Srihari, Representation of Three-Dimensional Digital Images, ACM Computing Surveys (CSUR), v.13 n.4, p.399-424, Dec. 1981
	Paul J. Besl , Ramesh C. Jain, Three-dimensional object recognition, ACM Computing Surveys (CSUR), v.17 n.1, p.75-145, March 1985
	S. J. Feghhi , M. Marefat , R. L. Kashyap, An object-oriented kernel for an integrated design and process planning system, Proceedings of the 27th ACM/IEEE conference on Design automation, p.437-443, June 24-27, 1990, Orlando, Florida, United States
	Markku Tamminen , Hanan Samet, Efficient octree conversion by connectivity labeling, ACM SIGGRAPH Computer Graphics, v.18 n.3, p.43-51, July 1984
	Masatomo Inui , Harald Otto , Fumihiko Kimura, Algebraic interpretation of geometric tolerances for evaluating geometric uncertainties in solid modeling, Proceedings on the second ACM symposium on Solid modeling and applications, p.377-386, May 19-21, 1993, Montreal, Quebec, Canada
	B. C. Vemuri , A. Radisavljevic, Multiresolution stochastic hybrid shape models with fractal priors, ACM Transactions on Graphics (TOG), v.13 n.2, p.177-207, April 1994
	Guillaume Caumon , Charles H. Sword, Jr. , Jean-Laurent Mallet, Constrained modifications of non-manifold B-reps, Proceedings of the eighth ACM symposium on Solid modeling and applications, June 16-20, 2003, Seattle, Washington, USA
	Yong Seok Suh , Michael J. Wozny, Interactive feature extraction for a form feature conversion system, Proceedings of the fourth ACM symposium on Solid modeling and applications, p.111-122, May 14-16, 1997, Atlanta, Georgia, United States
	M. Goodrich , M. Ghouse , J. Bright, Generalized sweep methods for parallel computational geometry, Proceedings of the second annual ACM symposium on Parallel algorithms and architectures, p.280-289, July 02-06, 1990, Island of Crete, Greece
	Hanan Samet, Hierarchical representations of collections of small rectangles, ACM Computing Surveys (CSUR), v.20 n.4, p.271-309, Dec. 1988
	Srinivas Raghothama , Vadim Shapiro, Topological framework for part families, Proceedings of the seventh ACM symposium on Solid modeling and applications, June 17-21, 2002, Saarbrücken, Germany
	Duoduo Liao , Shiaofen Fang, Fast volumetric CSG modeling using standard graphics system, Proceedings of the seventh ACM symposium on Solid modeling and applications, June 17-21, 2002, Saarbrücken, Germany
	M. Marefat , R. L. Kashyap, Geometric Reasoning for Recognition of Three-Dimensional Object Features, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.12 n.10, p.949-965, October 1990
	Dimitris Papadias , Timos Sellis, Qualitative representation of spatial knowledge in two-dimensional space, The VLDB Journal — The International Journal on Very Large Data Bases, v.3 n.4, October 1994
	David C. Gossard , Robert P. Zuffante , Hiroshi Sakurai, Representing Dimensions, Tolerances, and Features in MCAE Systems, IEEE Computer Graphics and Applications, v.8 n.2, p.51-59, March 1988
	David E. Cardoze, An optimal algorithm for the minimum edge cardinality cut surface problem, Proceedings of the nineteenth annual symposium on Computational geometry, June 08-10, 2003, San Diego, California, USA
	Guoling Shen , Takis Sakkalis , Nicholas Patrikalakis, Analysis of boundary representation model rectification, Proceedings of the sixth ACM symposium on Solid modeling and applications, p.149-158, May 2001, Ann Arbor, Michigan, United States
	Yehuda E. Kalay, Interactive shape generation and spatial conflict testing, Proceedings of the 18th conference on Design automation, p.75-81, June 29-July 01, 1981, Nashville, Tennessee, United States
	Silvia Ansaldi , Leila De Floriani , Bianca Falcidieno, Geometric modeling of solid objects by using a face adjacency graph representation, ACM SIGGRAPH Computer Graphics, v.19 n.3, p.131-139, Jul. 1985
	Qiang Ji , Michael M. Marefat, Machine interpretation of CAD data for manufacturing applications, ACM Computing Surveys (CSUR), v.29 n.3, p.264-311, Sept. 1997
	André Guéziec , Gabriel Taubin , Francis Lazarus , Bill Horn, Cutting and Stitching: Converting Sets of Polygons to Manifold Surfaces, IEEE Transactions on Visualization and Computer Graphics, v.7 n.2, p.136-151, April 2001
	Claudio Mirolo , Enrico Pagello, A Solid Modelling System for Robot Action Planning, IEEE Computer Graphics and Applications, v.9 n.1, p.55-69, January 1989
	Farhad Arbab, Set Models and Boolean Operations for Solids and Assemblies, IEEE Computer Graphics and Applications, v.10 n.6, p.76-86, November 1990
	James R. Miller, Analysis of Quadric-Surface-Based Solid Models, IEEE Computer Graphics and Applications, v.8 n.1, p.28-42, January 1988
	James R. Miller, Architectural Issues in Solid Modelers, IEEE Computer Graphics and Applications, v.9 n.5, p.72-87, September 1989
	Whoi-Yul Kim , Avinash C. Kak, 3-D Object Recognition Using Bipartite Matching Embedded in Discrete Relaxation, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.13 n.3, p.224-251, March 1991
	Y. F. Wang, Characterizing Three-Dimensional Surface Structures from Visual Images, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.13 n.1, p.52-60, January 1991
	S. Xie , T. W. Calvert, CSG-EESI: A New Solid Representation Scheme and a Conversion Expert System, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.10 n.2, p.221-234, March 1988
	Arpan Biswas , Vadim Shapiro , Igor Tsukanov, Heterogeneous material modeling with distance fields, Computer Aided Geometric Design, v.21 n.3, p.215-242, March 2004
	Jan Helge Bøhn, Removing Zero-Volume Parts from CAD Models for Layered Manufacturing, IEEE Computer Graphics and Applications, v.15 n.6, p.27-34, November 1995
	John R. Woodwark, Eliminating Redundant Primitives from Set-Theoretic Solid Models by a Consideration of Constituents, IEEE Computer Graphics and Applications, v.8 n.3, p.38-47, May 1988
	Luiz Velho, Simple and efficient polygonization of implicit surfaces, Journal of Graphics Tools, v.1 n.2, p.5-24, February 1996
	Hanan Samet , Robert E. Webber, Hierarchical Data Structures and Algorithms for Computer Graphics, IEEE Computer Graphics and Applications, v.8 n.4, p.59-65, 67-75, July 1988
	Christoph M. Hoffmann , Jaroslaw R. Rossignac, A Road Map To Solid Modeling, IEEE Transactions on Visualization and Computer Graphics, v.2 n.1, p.3-10, March 1996
	Patrick J. Flynn , Anil K. Jain, CAD-Based Computer Vision: From CAD Models to Relational Graphs, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.13 n.2, p.114-132, February 1991
	Joshua U. Turner, Accurate Solid Modeling Using Polyhedral Approximations, IEEE Computer Graphics and Applications, v.8 n.3, p.14-28, May 1988
	James R. Miller, Incremental Boundary Evaluation Using Inference of Edge Classifications, IEEE Computer Graphics and Applications, v.13 n.1, p.71-78, January 1993
	Farhad Arbab , Larry Lichten , Michel A. Melkanoff, Toward CAM-oriented CAD, Proceedings of the 19th conference on Design automation, p.239-245, January 1982
	Alejandro Garcia-Alonso , Nicolás Serrano , Juan Flaquer, Solving the Collision Detection Problem, IEEE Computer Graphics and Applications, v.14 n.3, p.36-43, May 1994
	J. L. Schneiter , T. B. Sheridan, An Automated Tactile Sensing Strategy for Planar Object Recognition and Localization, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.12 n.8, p.775-786, August 1990
	Siome Klein Goldenstein , Christian Vogler , Dimitris Metaxas, Statistical Cue Integration in DAG Deformable Models, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.25 n.7, p.801-813, July 2003
	T. W. Chen , W. C. Lin, A Neural Network Approach to CSG-Based 3-D Object Recognition, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.16 n.7, p.719-726, July 1994
	Galina I. Pasko , Alexander A. Pasko , Tosiyasu L. Kunii, Bounded Blending for Function-Based Shape Modeling, IEEE Computer Graphics and Applications, v.25 n.2, p.36-45, March 2005
	Rahul Khardekar , Greg Burton , Sara McMains, Finding feasible mold parting directions using graphics hardware, Proceedings of the 2005 ACM symposium on Solid and physical modeling, p.233-243, June 13-15, 2005, Cambridge, Massachusetts
	Adam Hoover , Dmitry Goldgof , Kevin W. Bowyer, Extracting a Valid Boundary Representation from a Segmented Range Image, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.17 n.9, p.920-924, September 1995
	K. Y. Lee , C. G. Armstrong , M. A. Price , J. H. Lamont, A small feature suppression/unsuppression system for preparing B-rep models for analysis, Proceedings of the 2005 ACM symposium on Solid and physical modeling, p.113-124, June 13-15, 2005, Cambridge, Massachusetts
	Ryan Schmidt , Brian Wyvill, Generalized sweep templates for implicit modeling, Proceedings of the 3rd international conference on Computer graphics and interactive techniques in Australasia and South East Asia, November 29-December 02, 2005, Dunedin, New Zealand
	Alexander Pasko , Valery Adzhiev , Benjamin Schmitt , Christophe Schlick, Constructive hypervolume modeling, Graphical Models, v.63 n.6, p.413-442, November 2001
	Ruud M. Bolle , Baba C. Vemuri, On Three-Dimensional Surface Reconstruction Methods, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.13 n.1, p.1-13, January 1991
	L. de Floriani, Feature Extraction from Boundary Models of Three-Dimensional Objects, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.11 n.8, p.785-798, August 1989
	C. H. Chien , J. K. Aggarwal, Model Construction and Shape Recognition from Occluding Contours, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.11 n.4, p.372-389, April 1989
	J. H. Vandenbrande , A. A. G. Requicha, Spatial Reasoning for the Automatic Recognition of Machinable Features in Solid Models, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.15 n.12, p.1269-1285, December 1993
	Jean-Francois Dufourd , Sven Luther, Interacting with parametrized geometric objects using lambda-terms, Proceedings of the seventh ACM symposium on Solid modeling and applications, June 17-21, 2002, Saarbrücken, Germany
	C. Mow , Thomas J. Peters , Neil F. Stewart, Specifying useful error bounds for geometry tools: an intersector exemplar, Computer Aided Geometric Design, v.20 n.5, p.247-251, 1 August 2003
	Sukhan Lee , Hernsoo Hahn, An Optimal Sensing Strategy for Recognition and Localization of 3D Natural Quadric Objects, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.13 n.10, p.1018-1037, October 1991
	José P. Duarte , João M. Rocha , Gonçalo Ducla Soares, Unveiling the structure of the Marrakech Medina: A shape grammar and an interpreter for generating urban form, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, v.21 n.4, p.317-349, October 2007
	O. Guenther , A. Buchmann, Research issues in spatial databases, ACM SIGMOD Record, v.19 n.4, p.61-68, Dec. 1990
	Roland T. Chin , Charles R. Dyer, Model-based recognition in robot vision, ACM Computing Surveys (CSUR), v.18 n.1, p.67-108, March 1986
	A. Paoluzzi , F. Bernardini , C. Cattani , V. Ferrucci, Dimension-independent modeling with simplicial complexes, ACM Transactions on Graphics (TOG), v.12 n.1, p.56-102, Jan. 1993
	Michael T. Goodrich, Applying parallel processing techniques to classification problems in constructive solid geometry, Proceedings of the first annual ACM-SIAM symposium on Discrete algorithms, p.118-128, January 22-24, 1990, San Francisco, California, United States
	James R. Miller, Class relationships and user extensibility in solid geometric modeling, Proceedings of the 2nd conference on USENIX Conference on Object-Oriented Technologies (COOTS), p.16-16, June 17-21, 1996, Toronto, Ontario, Canada
	Srinivas Raghothama, Constructive topological representations, Proceedings of the 2006 ACM symposium on Solid and physical modeling, June 06-08, 2006, Cardiff, Wales, United Kingdom
	Anthony Prior, "On-the-fly" voxelization for 6 degrees-of-freedom haptic virtual sculpting, Proceedings of the 2006 ACM international conference on Virtual reality continuum and its applications, June 14-April 17, 2006, Hong Kong, China
	A. Paoluzzi , V. Pascucci , G. Scorzelli, Progressive dimension-independent Boolean operations, Proceedings of the ninth ACM symposium on Solid modeling and applications, June 09-11, 2004, Genoa, Italy
	J. M. Smith , N. A. Dodgson, A topologically robust algorithm for Boolean operations on polyhedral shapes using approximate arithmetic, Computer-Aided Design, v.39 n.2, p.149-163, February, 2007
	Florian Kirsch , Jürgen Döllner, OpenCSG: a library for image-based CSG rendering, Proceedings of the USENIX Annual Technical Conference 2005 on USENIX Annual Technical Conference, p.49-49, April 10-15, 2005, Anaheim, CA
	X. Y. Kou , S. T. Tan, Heterogeneous object modeling: A review, Computer-Aided Design, v.39 n.4, p.284-301, April, 2007
	Antonio DiCarlo , Franco Milicchio , Alberto Paoluzzi , Vadim Shapiro, Solid and physical modeling with chain complexes, Proceedings of the 2007 ACM symposium on Solid and physical modeling, June 04-06, 2007, Beijing, China
	Jean-François Dufourd, Design and formal proof of a new optimal image segmentation program with hypermaps, Pattern Recognition, v.40 n.11, p.2974-2993, November, 2007
	Jean-François Dufourd, A hypermap framework for computer-aided proofs in surface subdivisions: genus theorem and Euler's formula, Proceedings of the 2007 ACM symposium on Applied computing, March 11-15, 2007, Seoul, Korea
	Frederico Fonseca , Max Egenhofer , Clodoveu Davis , Gilberto Câmara, Semantic Granularity in Ontology-Driven Geographic Information Systems, Annals of Mathematics and Artificial Intelligence, v.36 n.1-2, p.121-151, September 2002
	Mark Segal , Carlo H. Séquin, Consistent calculations for solids modeling, Proceedings of the first annual symposium on Computational geometry, p.29-38, June 05-07, 1985, Baltimore, Maryland, United States
	K. D. Toennies , U. Tronnier, 3D modeling using an extended cell enumeration representation, ACM SIGGRAPH Computer Graphics, v.24 n.5, p.13-20, Nov. 1990
	Frank Manola , Jack A. Orenstein, Toward a General Spatial Data Model for an Object-Oriented DBMS, Proceedings of the 12th International Conference on Very Large Data Bases, p.328-335, August 25-28, 1986
	Oliver Günther , Eugene Wong, A Dual Space Representation for Geometric Data, Proceedings of the 13th International Conference on Very Large Data Bases, p.501-506, September 01-04, 1987
	Claude Puech , Hussein Yahia, Quadtrees, octrees, hyperoctrees: a unified analytical approach to tree data structures used in graphics, geometric modeling and image processing, Proceedings of the first annual symposium on Computational geometry, p.272-280, June 05-07, 1985, Baltimore, Maryland, United States
	Vitaliano Milanese, Interpreting RSets, SSets and features by denotational semantics, ACM SIGPLAN Notices, v.31 n.7, p.40-47, July 1996
	Brandon Bennett , Anthony G. Cohn , Frank Wolter , Michael Zakharyaschev, Multi-Dimensional Modal Logic as a Framework for Spatio-Temporal Reasoning, Applied Intelligence, v.17 n.3, p.239-251, November-December 2002
	V. Milanese, Aspects of OBERON suitable for graphics applications, ACM SIGPLAN Notices, v.24 n.8, p.37-45, Aug. 1989
	Ari Requicha , Dan Arbuckle, CAD/CAM for Nanoscale Self-Assembly, IEEE Computer Graphics and Applications, v.26 n.2, p.88-91, March 2006
	Adam Hoover , Dmitry Goldgof , Kevin W. Bowyer, Dynamic-Scale Model Construction From Range Imagery, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.20 n.12, p.1352-1357, December 1998
	Chitra Dorai , Anil K. Jain, COSMOS-A Representation Scheme for 3D Free-Form Objects, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.19 n.10, p.1115-1130, October 1997
	Mohamad Eid , Mauricio Orozco , Abdulmotaleb El Saddik, A guided tour in haptic audio visual environments and applications, International Journal of Advanced Media and Communication, v.1 n.3, p.265-297, June 2007
	Fabiano Romeiro , Luiz Velho , Luiz Henrique de Figueiredo, Computer Graphics Brazil: Scalable GPU rendering of CSG models, Computers and Graphics, v.32 n.5, p.526-539, October, 2008
	Hüseyin Erdim , Horea T. Ilieş, Classifying points for sweeping solids, Computer-Aided Design, v.40 n.9, p.987-998, September, 2008
	G. Gallerini , M. De Donatis, 3D modeling using geognostic data: The case of the low valley of Foglia river (Italy), Computers & Geosciences, v.35 n.1, p.146-164, January, 2009
	Jean-François Dufourd, Polyhedra genus theorem and Euler formula: A hypermap-formalized intuitionistic proof, Theoretical Computer Science, v.403 n.2-3, p.133-159, August, 2008
	Paulos J. Nyirenda , Willem F. Bronsvoort, Numeric and curve parameters for freeform surface feature models, Computer-Aided Design, v.40 n.8, p.839-851, August, 2008
	S. Biasotti , L. De Floriani , B. Falcidieno , P. Frosini , D. Giorgi , C. Landi , L. Papaleo , M. Spagnuolo, Describing shapes by geometrical-topological properties of real functions, ACM Computing Surveys (CSUR), v.40 n.4, p.1-87, October 2008
	Mikola Lysenko , Roshan D'Souza , Ching-Kuan Shene, Improved Binary Space Partition merging, Computer-Aided Design, v.40 n.12, p.1113-1120, December, 2008
	Joseph O'Rourke, Polyhedra of minimal area as 3D object models, Proceedings of the 7th international joint conference on Artificial intelligence, p.664-666, August 24-28, 1981, Vancouver, BC, Canada
	Andrew Gelsey, Automated physical modeling, Proceedings of the 11th international joint conference on Artificial intelligence, p.1225-1230, August 20-25, 1989, Detroit, Michigan