ACM Home Page
Please provide us with feedback. Feedback
Interface driven domain-independent modeling architecture for “soft-commissioning” and “reality in the loop”
Full text PdfPdf (150 KB)
Source Winter Simulation Conference archive
Proceedings of the 31st conference on Winter simulation: Simulation---a bridge to the future - Volume 1 table of contents
Phoenix, Arizona, United States
Pages: 798 - 805  
Year of Publication: 1999
ISBN:0-7803-5780-9
Authors
Franz Auinger  PROFACTOR Produktionsforschungs GmbH, Wehrgrabengasse 1-5, A-4400 Steyr, Austria
Markus Vorderwinkler  PROFACTOR Produktionsforschungs GmbH, Wehrgrabengasse 1-5, A-4400 Steyr, Austria
Georg Buchtela  PROFACTOR Produktionsforschungs GmbH, Wehrgrabengasse 1-5, A-4400 Steyr, Austria
Sponsors
ACM: Association for Computing Machinery
SIGSIM: ACM Special Interest Group on Simulation and Modeling
Publisher
ACM  New York, NY, USA
Bibliometrics
Downloads (6 Weeks): 2,   Downloads (12 Months): 12,   Citation Count: 6
Additional Information:

references   cited by   index terms   collaborative colleagues  

Tools and Actions: Review this Article  
DOI Bookmark: Use this link to bookmark this Article: http://doi.acm.org/10.1145/324138.324504
What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

 
1
Bodner, D. A., and S. A. Reveliotis. 1997. Virtual Factories: An Object-Oriented Simulation-Based Framework for Real-Time FMS Control. In Proc. of IEEE International Conf. on Emerging Technologies and Factory Automation, Los Angeles. Institute of Electrical and Electronics Engineers, Piscataway, New Jersey.
 
2
Czarnecki, K. 1996. Separation of Concerns - objektorientierte Frameworks und das generative Paradigma. In Objektspektrum (6).
 
3
 
4
Graebe S., M. Schleicher, R. Steringer, and G. Zeichen. 1997. Reality in the Loop; In Proc. of MSD'97 - Manufacturing System Design. Magdeburg.
 
5
 
6
Kiesz, J. U. 1995. Objektorientierte Modellierung von Automatisierungssystemen - Software Engineering f~r Embedded Systems. Springer Verlag, 1995.
 
7
Marayanan, S., D. A. Bodner, U. Sreekanth, T. Govindaraj, L. F. Mc Ginnis, and C. M. Mitchell. 1998. Research in Object-Oriented Manufacturing Simulations: An Assessment of the State of the Art. In IIE Transactions, 30(9), Sept., 795-810, Kluwer Academic Publishers.
 
8
Praehofer H., W. Jacak, G. Jahn, and G. Haider. 1994. Supervising Manufacturing System Operation by DEVS-based Intelligent Control; In Proc of AIS'94, Gainesville, USA.
 
9
Praehofer H. 1996. Object Oriented Modeling and Configuration of Simulation Programs; In Proc of European Meeting on Cybernetics and Systems Research, 259-264.
 
10
Shen W., and D. H. Norrie. 1999. Agent-Based Systems for intelligent Manufacturing: A State-of-the-Art Survey. In Int'l Journal of Knowledge and Information Systems, 1(2), 129-156. http: //www.acs.ucalgary.ca/~wshen/papers/ survey-abm. htm. {accessed 6/1999 }
 
11
 
12
 
13
Van Brussel H. 1994. Holonic Manufacturing Systems, The Vision Matching the Problem. In Proc. of 1 st European Conf. on Holonic Manufacturing Systems, IFW-Hannover, Hannover, Dec 1 1994.
 
14
Vorderwinkler M., T. Eder, R. Steringer, and M. Schleicher. 1999. An Architecture for Soft-Comissioning - Verifying Control Software by Linking Discrete Event Simulators to Real World Control Systems. In Proc of ESM'99 - 13 th European Simulation Multiconference, Warsaw, June 1-4, 1999, 191-198.
 
15
 
16
Zeigler B.P., H. Pr~hofer. Interfacing Continuous and Discrete Models for Simulation and Control. In Int. Conf. on Environmental Systems, Denvers, Mass. USA, July 1998

CITED BY  6

Collaborative Colleagues:
Franz Auinger: colleagues
Markus Vorderwinkler: colleagues
Georg Buchtela: colleagues