Optimization of inductor circuits via geometric programming

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Optimization of inductor circuits via geometric programming

Full text

Pdf (127 KB)

Source

Annual ACM IEEE Design Automation Conference archive
Proceedings of the 36th annual ACM/IEEE Design Automation Conference table of contents

New Orleans, Louisiana, United States

Pages: 994 - 998

Year of Publication: 1999

ISBN:1-58133-109-7

Authors

Maria del Mar Hershenson	Electrical Engineering Department, Stanford University, Stanford, CA
Sunderarajan S. Mohan	Electrical Engineering Department, Stanford University, Stanford, CA
Stephen P. Boyd	Electrical Engineering Department, Stanford University, Stanford, CA
Thomas H. Lee	Electrical Engineering Department, Stanford University, Stanford, CA

Sponsors

EDAC : Electronic Design Automation Consortium
IEEE-CAS : Circuits & Systems
SIGDA: ACM Special Interest Group on Design Automation

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 3, Downloads (12 Months): 34, Citation Count: 17

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Request Permissions Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/309847.310112 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	C. R Yue et al. A physical model for planar spiral inductors on silicon. In Proceedings IEEE IEDM' 96, 1996.
	2	R.J. Duffin, E. L. Peterson, and C. Zener. Geometric Programming- Theory and Applications. Wiley, 1967.
	3	C. P. Yue and S. S. Wong. On-chip spiral inductors with patterned ground shields for Si-based RF IC's. IEEE Journal of solid-state circuits, 33(5):743-752, May 1998.
	4	J. R. Long and M. A. Copeland. The modeling, characterization, and design of monolithic inductors for silicon RF IC's. IEEE Journal of Solid-State Circuits, 32(3):357-369, March 1997.
	5	S. S. Mohan et al. Simple accurate expressions for planar spiral inductances. Submitted to IEEE Journal of Solid-State Circuits, http://smirc.stanford.edu/, 1999.
	6	Thomas H. Lee. The design of CMOS radio-frequency integrated circuits. Cambridge University Press, 1998.
	7	Maria del Mar Hershenson , Stephen P. Boyd , Thomas H. Lee, GPCAD: a tool for CMOS op-amp synthesis, Proceedings of the 1998 IEEE/ACM international conference on Computer-aided design, p.296-303, November 08-12, 1998, San Jose, California, United States [doi>10.1145/288548.288628]

CITED BY 19

	Georges G. E. Gielen , Rob A. Rutenbar, Synthesis of analog and mixed-signal integrated electronic circuits, Formal engineering design synthesis, Cambridge University Press, New York, NY, 2001
	C. De Ranter , B. De Muer , G. Van der Plas , P. Vancorenland , M. Steyaert , G. Gielen , W. Sansen, CYCLONE: automated design and layout of RF LC-oscillators, Proceedings of the 37th conference on Design automation, p.11-14, June 05-09, 2000, Los Angeles, California, United States
	Maria del Mar Hershenson, Design of pipeline analog-to-digital converters via geometric programming, Proceedings of the 2002 IEEE/ACM international conference on Computer-aided design, p.317-324, November 10-14, 2002, San Jose, California
	Domine Leenaerts , Georges Gielen , Rob A. Rutenbar, CAD solutions and outstanding challenges for mixed-signal and RFIC design, Proceedings of the 2001 IEEE/ACM international conference on Computer-aided design, November 04-08, 2001, San Jose, California
	Maria del Mar Hershenson , Ali Hajimiri , Sunderarajan S. Mohan , Stephen P. Boyd , Thomas H. Lee, Design and optimization of LC oscillators, Proceedings of the 1999 IEEE/ACM international conference on Computer-aided design, p.65-69, November 07-11, 1999, San Jose, California, United States
	Yang Xu , Lawrence T. Pileggi , Stephen P. Boyd, ORACLE: optimization with recourse of analog circuits including layout extraction, Proceedings of the 41st annual conference on Design automation, June 07-11, 2004, San Diego, CA, USA
	Arthur Nieuwoudt , Yehia Massoud, Multi-level approach for integrated spiral inductor optimization, Proceedings of the 42nd annual conference on Design automation, June 13-17, 2005, San Diego, California, USA
	Yang Xu , Kan-Lin Hsiung , Xin Li , Ivan Nausieda , Stephen Boyd , Lawrence Pileggi, OPERA: optimization with ellipsoidal uncertainty for robust analog IC design, Proceedings of the 42nd annual conference on Design automation, June 13-17, 2005, San Diego, California, USA
	W. T. Cheung , N. Wong, Power optimization in a repeater-inserted interconnect via geometric programming, Proceedings of the 2006 international symposium on Low power electronics and design, October 04-06, 2006, Tegernsee, Bavaria, Germany
	Varun Aggarwal , Una-May O'Reilly, Simulation-based reusable posynomial models for MOS transistor parameters, Proceedings of the conference on Design, automation and test in Europe, April 16-20, 2007, Nice, France
	Xin Li , Jiayong Le , Lawrence T. Pileggi, Statistical performance modeling and optimization, Foundations and Trends® in Electronic Design Automation, v.1 n.4, p.331-480, April 2006
	Xin Li , P. Gopalakrishnan , Yang Xu , T. Pileggi, Robust analog/RF circuit design with projection-based posynomial modeling, Proceedings of the 2004 IEEE/ACM International conference on Computer-aided design, p.855-862, November 07-11, 2004
	Jintae Kim , Jaeseo Lee , L. Vandenberghe, Techniques for improving the accuracy of geometric-programming based analog circuit design optimization, Proceedings of the 2004 IEEE/ACM International conference on Computer-aided design, p.863-870, November 07-11, 2004
	A. Nieuwoudt , Y. Massoud, Robust automated synthesis methodology for integrated spiral inductors with variability, Proceedings of the 2005 IEEE/ACM International conference on Computer-aided design, p.502-507, November 06-10, 2005, San Jose, CA
	Genemala Haobijam , Roy Paily, Efficient optimization of integrated spiral inductor with bounding of layout design parameters, Analog Integrated Circuits and Signal Processing, v.51 n.3, p.131-140, June 2007
	Yong Zhan , Sachin S. Sapatnekar, Optimization of Integrated Spiral Inductors Using Sequential Quadratic Programming, Proceedings of the conference on Design, automation and test in Europe, p.10622, February 16-20, 2004
	Tuck Boon Chan , Hsin-Chia Lu , Jun-Kuei Zeng , Charlie Chung-Ping Chen, LTCC spiral inductor modeling, synthesis, and optimization, Proceedings of the 2008 conference on Asia and South Pacific design automation, January 21-24, 2008, Seoul, Korea
	Yang Xu , Kan-Lin Hsiung , Xin Li , Lawrence T. Pileggi , Stephen P. Boyd, Regular analog/RF integrated circuits design using optimization with recourse including ellipsoidal uncertainty, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, v.28 n.5, p.623-637, May 2009
	Yang Xu , Kan-Lin Hsiung , Xin Li , Lawrence T. Pileggi , Stephen P. Boyd, Regular analog/RF integrated circuits design using optimization with recourse including ellipsoidal uncertainty, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, v.28 n.5, p.623-637, May 2009