A coherent sweep plane slicer for layered manufacturing

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	3D Systems, Inc. "Stereolithography Interface Specification". Company literature, 1988.
	2	Gill Barequet , Micha Sharir, Filling gaps in the boundary of a polyhedron, Computer Aided Geometric Design, v.12 n.2, p.207-229, March 1995 [doi>10.1016/0167-8396(94)00011-G]
	3	B. G. Baumgart. A Polyhedron Representation for Computer Vision. In Proceedings of the National Computer Conference, pages 589-596, 1975.
	4	Joseph J. Beaman , Harris L. Marcus , David L. Bourell , Joel W. Barlow , Richard H. Crawford , Kevin P. McAlea, Solid Freeform Fabrication: A New Direction in Manufacturing, Kluwer Academic Publishers, Norwell, MA, 1997
	5	Jan Helge Bøhn , Michael J. Wozny, A topology-based approach for sell-closure, Selected and Expanded Papers from the IFIP TC5/WG5.2 Working Conference on Geometric Modeling for Product Realization, p.297-319, September 27-October 01, 1992
	6	Mark de Berg , Marc van Kreveld , Mark Overmars , Otfried Schwarzkopf, Computational geometry: algorithms and applications, Springer-Verlag New York, Inc., Secaucus, NJ, 1997
	7	A. Dolenc and I. Makel~i. Slicing procedures for layered manufacturing techniques. Computer Aided Design, 26(2):119- 26, February 1994.
	8	James D. Foley , Andries van Dam , Steven K. Feiner , John F. Hughes, Computer graphics: principles and practice (2nd ed.), Addison-Wesley Longman Publishing Co., Inc., Boston, MA, 1990
	9	E. Gursoz, Y. Choi, and E Prinz. Vertex-based Representation of Non-manifold Boundaries. in Geometric Modeling for Product Engineering, pages 107-130. North-Holland, Amsterdam, 1990.
	10	C.F. Kirschman and C. C. Jara-Almonte. A Parallel slicing algorithm for solid freeform fabrication processes. In Proceedings of the Solid Freeform Fabrication Symposium. University of Texas at Austin, August 1992.
	11	Prashant Kulkami and Debasish Dutta. An Accurate Slicing Procedure for Layered Manufacturing. Computer Aided Design, 28(9):683-97, September 1996.
	12	Martti Mäntylä, Boolean operations of 2-manifolds through vertex neighborhood classification, ACM Transactions on Graphics (TOG), v.5 n.1, p.1-29, Jan. 1986 [doi>10.1145/7529.7530]
	13	M. Mantyla, Introduction to Solid Modeling, W. H. Freeman & Co., New York, NY, 1988
	14	T. M. Murali , Thomas A. Funkhouser, Consistent solid and boundary representations from arbitrary polygonal data, Proceedings of the 1997 symposium on Interactive 3D graphics, p.155-ff., April 27-30, 1997, Providence, Rhode Island, United States [doi>10.1145/253284.253326]
	15	Stephen J. Rock and Michael J. Wozny. Utilizing Topological Information to Increase Scan Vector Generation Efficiency. Solid Freeform Fabrication Symposium Proceedings, pages 28-36, 1991.
	16	Carlo H. Séquin , Houman Meshkin , Laura Downs, Interactive generation of Scherk-Collins sculptures, Proceedings of the 1997 symposium on Interactive 3D graphics, p.163-ff., April 27-30, 1997, Providence, Rhode Island, United States [doi>10.1145/253284.253331]
	17	Spatial Technology, Inc, Boulder, CO. AcIS Save File Format Manual, 1996.
	18	H. Voelcker. "Modeling in the Design Process". In Design and Analysis of lntegrated Manufacturing Systems, pages 167-199. National Academy Press, Washington, DC, 1988.
	19	Kevin Weiler. The Radial Edge Structure: a Topological Representation for Non-manifold Geometric Boundary Modeling. In Geometric Modeling for CAD Applications, pages 3-36. Noah-Holland, Amsterdam, 1988.