Extended variational design technology—foundation for integrated design automation

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Extended variational design technology—foundation for integrated design automation

Full text

Pdf (919 KB)

Source

ACM Symposium on Solid and Physical Modeling archive
Proceedings of the fifth ACM symposium on Solid modeling and applications table of contents

Ann Arbor, Michigan, United States

Pages: 13 - 22

Year of Publication: 1999

ISBN:1-58113-080-5

Authors

Jack C. H. Chung	SDRC, 2000 Eastman Drive, Milford, Ohio
Teng-Shang Hwang	SDRC, 2000 Eastman Drive, Milford, Ohio
Chien-Tai Wu	SDRC, 2000 Eastman Drive, Milford, Ohio
Yu Jiang	SDRC, 2000 Eastman Drive, Milford, Ohio
Jai-Yi Wang	SDRC, 2000 Eastman Drive, Milford, Ohio
Yong Bai	SDRC, 2000 Eastman Drive, Milford, Ohio
Hongliu Zou	SDRC, 2000 Eastman Drive, Milford, Ohio

Sponsor

SIGGRAPH: ACM Special Interest Group on Computer Graphics and Interactive Techniques

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 3, Downloads (12 Months): 16, Citation Count: 1

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/304012.304014 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	B. Aldefeld, Variation of geometrics based on a geometric-reasoning method, Computer-Aided Design, v.20 n.3, p.117-126, April, 1988 [doi>10.1016/0010-4485(88)90019-X]
	2	Anantha, Ram, Kramer, Glenn A., and Crawford, Richard H., "Assembly Modeling By Geometric Constraint Satisfaction", Computer-Aided Design, Vol. 28, No. 9 1996.
	3	Eric Allan Bier, Snap-dragging: interactive geometric design in two and three dimensions, 1988
	4	Borning, A., "Thinglab - An Object-Oriented System For Building Simulations Using Constraints;' Proc. Fifth international Joint Conference on Artificial Intelligence, 1977.
	5	Beat Brüderlin, Using Prolog for Constructing Geometric Objects defined by Constraints, Research Contributions from the European Conference on Computer Algebra-Volume 2, p.448-459, April 01-03, 1985
	6	Chung, J. C. H., Klahs, J. W., Cook, R. L., and Sluiter, T., "Implementation Issues In Variational Geometry And Constraint Management," Third International Conference on MDA/CAM, Robotics and Factory of the Future, August 14- 17, 1988.
	7	Chung, J. C. H., and Schussel, M. D., "Technical Evaluation Of Variational And Parametric Design," Proc. ASME International Computers in Engineering Conference, 1990.
	8	Ioannis Fudos , Christoph M. Hoffmann, A graph-constructive approach to solving systems of geometric constraints, ACM Transactions on Graphics (TOG), v.16 n.2, p.179-216, April 1997 [doi>10.1145/248210.248223]
	9	Hillyard, R. C., and Braid, I. C., "Analysis Of Dimension And Tolerances In Computer-Aided Mechanical Design," Computer-Aided Design, Vol. 10, No. 3, 1978.
	10	Hornbeck, R. W., Numerical Methods, Quantum Publishers, 1975.
	11	Ching-Yao Hsu, Graph-based approach for solving geometric constraint problems, University of Utah, Salt Lake City, UT, 1996
	12	Kimura, F., Suzuki, H., Ando, H., Sato, T., and Kinosada, A., "Variational Geometry Based On Logical Constraints And Its Applications To Product Modeling" Annals of the CIRP, Vol. 36, No. I, 1987.
	13	Glenn A. Kramer, Using degrees of freedom analysis to solve geometric constraint systems, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.371-378, June 05-07, 1991, Austin, Texas, United States [doi>10.1145/112515.112566]
	14	Light, R. A., and Gossard, D. C., "Modification Of Geometric Models Through Variational Geometry," Computer-Aided Design, Vol. 14, No. 4., 1982.
	15	V. C. Lin , D. C. Gossard , R. A. Light, Variational geometry in computer-aided design, ACM SIGGRAPH Computer Graphics, v.15 n.3, p.171-177, August 1981
	16	Newell, R. G., and }?arden, G., "Parametric Design In Medusa System," in Warman, E. A. (ed.) Computer Appl. in Production and Engineering, North Holland Publishing Co., 1983.
	17	J. C. Owen, Algebraic solution for geometry from dimensional constraints, Proceedings of the first ACM symposium on Solid modeling foundations and CAD/CAM applications, p.397-407, June 05-07, 1991, Austin, Texas, United States [doi>10.1145/112515.112573]
	18	D. Roller, An approach to computer-aided parametric, Computer-Aided Design, v.23 n.5, p.385-391, June 1991 [doi>10.1016/0010-4485(91)90033-S]
	19	Serrano, D., and Gossard, D. C., "Combining Mathematical Models With Geometric Models in CAE Systems," Proc. ASME Computer in Eng. Conf., Chicago, IL, July 1986.
	20	Ivan E. Sutherland, Sketch pad a man-machine graphical communication system, Proceedings of the SHARE design automation workshop, p.6.329-6.346, January 1964 [doi>10.1145/800265.810742]
	21	Taylor, A. E. and Mann, W. R., (1976),Advance Calculus, 3rd ed., John Wiley & Sons, New York.
	22	Todd, P., "An Algorithm For Determining Consistency And Manufacturability Of Dimensioned Drawings" Proc. CAD86, Butterworlhs, 1986.