Processing of CAD-data—conversion, verification and repair

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Processing of CAD-data—conversion, verification and repair

Full text

Pdf (711 KB)

Source

ACM Symposium on Solid and Physical Modeling archive
Proceedings of the fourth ACM symposium on Solid modeling and applications table of contents

Atlanta, Georgia, United States

Pages: 248 - 254

Year of Publication: 1997

ISBN:0-89791-946-7

Authors

F.-L. Krause	Fraunhofer-Institut für Produktionsanlagen and Konstruktionstechnik (IPK), Berlin, Pascalstr. 8-9, 10587 Berlin, Germany
C. Stiel	Fraunhofer-Institut für Produktionsanlagen and Konstruktionstechnik (IPK), Berlin, Pascalstr. 8-9, 10587 Berlin, Germany
J. Lüddemann	Fraunhofer-Institut für Produktionsanlagen and Konstruktionstechnik (IPK), Berlin, Pascalstr. 8-9, 10587 Berlin, Germany

Sponsor

SIGGRAPH: ACM Special Interest Group on Computer Graphics and Interactive Techniques

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 7, Downloads (12 Months): 42, Citation Count: 5

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/267734.267796 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	Anderl, R.: CAD-Schnittstellen, Methoden und Werkzeuge zur CA-Integration, Carl Hanser Verlag Mtinchen Wien, 1993.
	2	N.N.: VDAFS-Version 2.0, Verband der Automobilindustrie e. V. (VDA), 6000 Frankfurt am Main, Westendstr. 31.
	3	N.N.: VDMA/VDA-Einheitsblatt 66318, Rechneruntersttitztes Konstruieren: Regeln ftir den CAD-Datenaustausch; Beuth Verlag Berlin, I989.
	4	N.N.: ISO 10303 Industrial Automation Systems- Product Data Representation and Exchange, Normenreihe, 1994.
	5	N.N.: Initial Graphics Exchange Specification (IGES) Version 5.1, U.S. Department of Commerce, National Bureau of Standards, Sept. 1991.
	6	Krause, F.-L.; Produktionsorientierte Normung von Ciesla, M. and STEP, ZwF 89 (1994)11, Stephan, M.: Carl Hanser Verlag, M~inchen 1994.
	7	F.-L. Krause , J. Lüddemann, Virtual clay modelling, Proceedings of the fifth IFIP TC5/WG5.2 international workshop on geometric modeling in computer aided design on Product modeling for computer integrated design and manufacture, p.162-175, January 1997, Airlie, Virginia, United States
	8	Krause, F.-L.; Featurebasierte Konstruktion mit Stiel,C.: Freiformfl~ichen, ZwF 91 (1996)3, Carl Hanser Verlag, Mianchen 1996.
	9	Krause, F.-L.; Anforderungen an die integrierte Lttddemann,J.: Konstruktion und Fertigung von Freiformfl~ichen; Karlsruher Kolloquium "Konstruktion und Fertigung yon Freiformfl~ichen",27. u. 28.02.1991, S. 117 - 138
	10	Stiel,C.: CAD-Repair, CAESAR Technical Report, July 1996.
	11	Weatherill,N.P. The Design of a Graphical User ; Environment for Multi-Disciplinary Marchant,M.J.; Computational Engineering, ECCOMAS Tuner-Smith, 96, Paris, Sept. 1996. E. Zheng,Y. and Sotirakos,M.:
	12	Josie Wernecke, The Inventor Toolmaker: Extending Open Inventor, Release 2, Addison-Wesley Longman Publishing Co., Inc., Boston, MA, 1994

CITED BY 5

	Guoling Shen , Takis Sakkalis , Nicholas Patrikalakis, Analysis of boundary representation model rectification, Proceedings of the sixth ACM symposium on Solid modeling and applications, p.149-158, May 2001, Ann Arbor, Michigan, United States
	Gill Barequet , Yuval Kaplan, A data front-end for layered manufacturing, Proceedings of the thirteenth annual symposium on Computational geometry, p.231-239, June 04-06, 1997, Nice, France
	Massimo M. Ficco , Ferruccio Mandorli , Harald E. Otto, Error classification and recovery within CAD model reconstruction, Proceedings of the fifth ACM symposium on Solid modeling and applications, p.316-317, June 08-11, 1999, Ann Arbor, Michigan, United States
	Fumiki Tanaka , Takeshi Kishinami, STEP-based quality diagnosis of shape data of product models for collaborative e-engineering, Computers in Industry, v.57 n.3, p.245-260, April 2006
	Guolin Duan , Jin Cai , Xiaoqian Chen , Tao Yao , Anping Xu, Application of XML to the graphic exchange technology of the modular fixture, Proceedings of the 7th WSEAS International Conference on Robotics, Control & Manufacturing Technology, p.284-289, April 15-17, 2007, Hangzhou, China