Interactive feature extraction for a form feature conversion system

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback
Take a look at the new version of this page: [ beta version ]. Tell us what you think.

Interactive feature extraction for a form feature conversion system

Full text

Pdf (1.49 MB)

Source

ACM Symposium on Solid and Physical Modeling archive
Proceedings of the fourth ACM symposium on Solid modeling and applications table of contents

Atlanta, Georgia, United States

Pages: 111 - 122

Year of Publication: 1997

ISBN:0-89791-946-7

Authors

Yong Seok Suh	Center for Advanced Technology, Rensselaer Polytechnic Institute, Troy, NY and Structural Dynamics Research Corporation, 2000 Eastman Drive, Milford, OH
Michael J. Wozny	Center for Advanced Technology, Rensselaer Polytechnic Institute, Troy, NY

Sponsor

SIGGRAPH: ACM Special Interest Group on Computer Graphics and Interactive Techniques

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 6, Downloads (12 Months): 50, Citation Count: 1

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/267734.267762 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	Bron93	Willem F. Bronsvoort , Frederik W. Jansen, Feature modelling and conversion: key concepts to concurrent engineering, Computers in Industry, v.21 n.1, p.61-86, Jan. 1993 [doi>10.1016/0166-3615(93)90045-3]
	Bron94	W F Bronsvoort, and F W Jansen, "Multi-view feature modeling for design and assembly," Advances in Feature Based Manufacturing, Chapter 14, M. Mantyla, J.J. Shah and D.S. Nau, editors, pp 315-330, Elsevier Science B.V., 1994
	Brun95	G. Brunetti , T. De Martino , B. Falcidieno , S. Habinger, A relational model for interactive manipulation of form features based on algebraic geometry, Proceedings of the third ACM symposium on Solid modeling and applications, p.95-104, May 17-19, 1995, Salt Lake City, Utah, United States [doi>10.1145/218013.218039]
	Dong88	X Dong, "Geometric feature extraction for computeraided process planning'," Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, USA, 1988
	Falc91	B Falcidieno and F Giannini, "Neutral format representation of feature-based models in multiple viewpoints context," In J. Pegna, J. Turner and M. Wozny, editors, Product Modeling for Computer-Aided Design and Manufacturing, IFIP, pp 165- 181, Elsevier Science Publishers B.V. (North-Holland), 1991
	Falc92	B. Falcidieno , F. Giannini , C. Porzia , M. Spagnuolo, A uniform approach to represent features in different application contexts, Computers in Industry, v.19 n.2, p.175-184, May 1992 [doi>10.1016/0166-3615(92)90020-N]
	Fiel94	M C Fields and D C Anderson, "Fast feature extraction for machining applications," Computer-Aided Design, Vol.26 No. 11, November 1994
	Flor89	L. de Floriani, Feature Extraction from Boundary Models of Three-Dimensional Objects, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.11 n.8, p.785-798, August 1989 [doi>10.1109/34.31442]
	Fu91	Z Fu and A de Pannington, "Geometric reasoning based on graph grammar parsing," In Advances in Design Automation, DE-Vol.32-2, ASME, pp 13-22, 1991
	Fu93	Z Fu, A de Pennington, and A Saia, "A graph grammar approach to feature representation and transformation'," Int. J. Computer Integrated Manufacturing, Vol.6 No.l&2, pp 137- 151, 1993
	Geel95	R Geelink, O W Salomons, F van Slooten, F.J.A.M. de Houten, and H.J.J. Kals, "Unified feature definition for feature based design and feature based manufacturing," In Proceedings of the Computers in Engineering Conference and the Engineering Database Symposium, ASME, pp. 517-533, 1995
	Han95	J H Han, and A A G Requicha, "Integration of feature based design and feature recognition" Proceedings of the Computers in Engineering Conference and the Engineering Database Symposium, ASME, 1995
	Hend84	M R Henderson, "Extraction of feature information from three dimensional CAD data," Ph.D. Thesis, Purdue University, West Lafayette, IN, USA, 1984
	Hend94	M R Henderson, G Srinath, R Stage, K Walker, and W Regli, "Boundary representation-based feature identification" In M. Mantyla, J.J. Shah, and D.S. Nau, editors, Advances in Feature Based Manufacturing, Chapter 2, Elsevier Science, pp 15-38, 1994
	Jaku82	Ryszard Jakubowski, "Syntactic characterization of machine parts shapes," Cybernetics and Systems: An International Journal, Vol. 13, No. 1, pp 1-24, 1982
	Jaku85	Ryszard Jakubowski, "Extraction of shape features for syntactic recognition of mechanical parts" IEEE Transactions on Systems, Man and Cybernetics, SMC- 15(5), 1985
	Josh88	S. Joshi , T. C. Chang, Graph-based heuristics for recognition of machined features from a 3D solid model, Computer-Aided Design, v.20 n.2, p.58-66, March, 1988 [doi>10.1016/0010-4485(88)90050-4]
	Kao95	Ching-Yao Kao , Soundar R. T. Kumara , Rangachar Kasturi, Extraction of 3D Object Features from CAD Boundary Representation Using the Super Relation Graph Method, IEEE Transactions on Pattern Analysis and Machine Intelligence, v.17 n.12, p.1228-1233, December 1995 [doi>10.1109/34.476517]
	Kim92	Y S Kim, "Recognition of form features using convex decomposition" Computer-Aided Design, Vol.24 No.9 pp 461- 476, September 1992
	Krak95	Klaas Jan de Kraker , Maurice Dohmen , Willem F. Bronsvoort, Multiple-way feature conversion to support concurrent engineering, Proceedings of the third ACM symposium on Solid modeling and applications, p.105-114, May 17-19, 1995, Salt Lake City, Utah, United States [doi>10.1145/218013.218044]
	Kypr80	L K Kyprianou, "Shape classification in computer aided design," Ph.D. Thesis, Computer Science Laboratory, Cambridge University, 1980
	Libar86	E C Libardi, J R Dixon, and M K Simmons, "Designing with features: Design and analysis of extrusions as an example," Paper No. 86-DE-4, ASME Spring National Design Engineering Conference, Chicago, March (1986)
	Luby86	Steven C Luby , John R Dixon , Melvin K Simmons, Creating and using a features data base, Computers in Mechanical Engineering, v.5 n.3, p.25-33, Nov. 1986
	Maha93	P V Mahajan, C Poli, D W Rozen, Wozny M J, "Design for stamping: A feature-based approach," In Proc. ASME National Design Engineering Show & Conference, Chicago, IL., March 1993
	Mart94	T D Martino, B Falcidieno, F Giannini, S Hasinger, and J Ovtcharova, "Feature based modeling by integrating design and recognition approaches," Computer-Aided Design, Vol.26, No.8, pp 646-653, August 1994
	Pini89	J M Pinilla, S Finger, and F B Prinz, "Shape feature description using an augmented topology graph grammar" In Proceedings NSF Engineering Design Research Conference, NSE June (1989) pp 285-300
	Prat88	M J Pratt, "Synthesis of an optimal approach to form feature modelling," In Proceedings of ASME Conference on Computers in Engineering, San Francisco, CA, August 1988
	Prat93	M J Pratt, "Applications of feature recognition in the product life-cycle?' Int. J. Computer Integrated Manufacturing, Vol.6, No.l&2, pp.13-19, 1993
	Regl95	William Clement Regli, III, Geometric algorithms for recognition of features from solid models, University of Maryland at College Park, College Park, MD, 1996
	Requ80	Aristides G. Requicha, Representations for Rigid Solids: Theory, Methods, and Systems, ACM Computing Surveys (CSUR), v.12 n.4, p.437-464, Dec. 1980 [doi>10.1145/356827.356833]
	Rich83	Elaine Rich, Artificial intelligence, McGraw-Hill, Inc., New York, NY, 1983
	Rose91	Rosen, D W, Dixon, j R, and Dong, X 'A methodology for conversions of feature-based representations' Design Thetry And Methodology - DTM '91, Vol. DE-Vol.31, ASME Design Technical Conferences - 3rd International Conference on Design Theory and Methodology, Miami, FL (1991) pp 45- 51
	Rose92a	D W Rosen, J R Dixon, C Poli, and X Dong, "Features and algorithms for tooling cost evaluation in injection molding and die casting," In Proc. 1992 Computers in Engineering Conference, San Francisco, CA, ASME, 1992
	Rose92b	D W Rosen, "A feature-based representation to support the design process and the manufacturability evaluation of mechanical components, '" Ph.D. Thesis, University of Massachusetts at Amherst, Amherst, MA, 1992
	Saku94	H Sakurai, "Decomposing a delta volume into maximal convex volumes and sequencing them for machining," In Kosuke Ishii, editor, ASME Computers in Engineering Conference, ASME, pp 135-142, September 1994
	Scha90	Robert J. Schalkoff, "Artificial Intelligence: An Engineering approach,' McGraw-Hill Publishing Company, 1990
	Shah88	J J Shah, "Feature transformations between applicationspecific feature spaces" Computer-Aided Engineering Journal, pp 247-255, December 1988
	Shah89	J J Shah, and A S Bhatnagar, "Group technology classification from feature-based geometric models" Manufacturing Review, Vol.2, No.3, pp 204-213, September 1989
	Shah92	Jami J. Shah , David Hsiao , John Leonard, A systematic approach for design-manufacturing feature mapping, Selected and Expanded Papers from the IFIP TC5/WG5.2 Working Conference on Geometric Modeling for Product Realization, p.205-221, September 27-October 01, 1992
	Shah94a	J J Shah, Y Shen, and A Shirur, "Determination of machining volumes from extensible sets of design features" Advances in Feature Based Manufacturing, M. Mantyla, J.J. Shah and D.S. Nau Editors, Elsevier Science B.V., pp 129-157, 1994
	Shah94b	J J Shah, G. Balakrishnan, M T Rogers, S D Urban, "Comparative study of procedural and declarative feature based geometric modeling," IFIP Conf. on Feature Modeling and Recognition in Advanced CAD~CAM Systems, Valencienne, France, May 1994
	Stal83	S M Staley, M R Henderson, and D C Anderson, "Using syntactic pattern recognition to extract feature information from a solid geometric data base," Computers in Mechanical Engineering, September 1983
	Suh95	Y S Suh, "A feature conversion CAD system for the concurrent engineering environment," Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1995
	Vand90	Jan Hendrik Vandenbrande , Aristides A. Requicha, Automatic recognition of machinable features in solid models, 1990
	Woo82	T C Woo, "Feature extraction by volume decomposition," In Proc. of CAD/CAM Technology in Mechanical Engineering Conference, MIT Press, 1982
	Wu96	M C Wu, and C R Liu, "Analysis on machined feature recognition techniques based on B-rep," Computer-Aided Design, Vol.28, No.8, pp.603-616, 1996
	Yang96	Ming-Hsuan Yang, and Michael M. Marefat, "Constraint-based feature recognition: Handling non-uniqueness in feature interactions,' In Proceedings of the 1996 IEEE International Conference on Robotics and Automation, Minneapolis, MN, April 1996