A data front-end for layered manufacturing

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

A data front-end for layered manufacturing

Full text

Pdf (1.31 MB)

Source

Annual Symposium on Computational Geometry archive
Proceedings of the thirteenth annual symposium on Computational geometry table of contents

Nice, France

Pages: 231 - 239

Year of Publication: 1997

ISBN:0-89791-878-9

Authors

Gill Barequet	Center for Geometric Computing, Dept. of Computer Science, Johns Hopkins University, Baltimore, MD
Yuval Kaplan	Responsible for software development, Cubital Ltd., 13 HaSadna St., Industrial Zone North, Ra'anana 43650, Israel

Sponsors

SIGACT: ACM Special Interest Group on Algorithms and Computation Theory
SIGGRAPH: ACM Special Interest Group on Computer Graphics and Interactive Techniques

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 5, Downloads (12 Months): 17, Citation Count: 1

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Request Permissions Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/262839.262977 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	3DS	3D SYSTEMS, INC. (Valencia, CA), Stereolithography Interface Specification, p/n 50065-S01-00, 1989.
	Ba	G. BAREQUZT, DCEL: A polyhedral database and programming environment, submitted for publication, 1996.
	BS1	Gill Barequet , Micha Sharir, Filling gaps in the boundary of a polyhedron, Computer Aided Geometric Design, v.12 n.2, p.207-229, March 1995 [doi>10.1016/0167-8396(94)00011-G]
	BS2	Gill Barequet , Micha Sharir, Piecewise-linear interpolation between polygonal slices, Computer Vision and Image Understanding, v.63 n.2, p.251-272, March 1996 [doi>10.1006/cviu.1996.0018]
	BW	Michael J. Wozny, Data Driven Solid Freeform Fabrication, Proceedings of the IFIP TC5 / WG5.3 Eight International PROLAMAT Conference on Human Aspects in Computer Integrated Manufacturing, p.71-82, June 24-26, 1992
	DM	A. DOLENC AND I. MAKEL#., Optimized triangulation of parametric surfaces, Technical Report TKO- B74, Helsinki University of Technology, 1991, Mathematics of Surfaces IV.
	FD	James D. Foley , Andries Van Dam, Fundamentals of interactive computer graphics, Addison-Wesley Longman Publishing Co., Inc., Boston, MA, 1982
	Go	H. Goldstein, Classical Mechanics, Addison-Wesley, Reading, MA, 1980.
	Kl	G.T. KLINCSEK, Minimal triangulations of polygonal domains, Annals of Discrete Mathematics, 9 (1980), 121-123.
	KSL	F.-L. Krause , C. Stiel , J. Lüddemann, Processing of CAD-data—conversion, verification and repair, Proceedings of the fourth ACM symposium on Solid modeling and applications, p.248-254, May 14-16, 1997, Atlanta, Georgia, United States [doi>10.1145/267734.267796]
	MD	I. MAKEL#. AND A. DOLENC, Some efficient procedures for correcting triangulated models, Proc. Syrup. on Solid Freeform Fabrication, Dept. of Mech. Eng., Univ. of Texas at Austin, 1993.
	MF	S.M. MORVAN AND G.M. FADEL, IVECS, interactive correction of .STL files in a virtual environment, Proc. Syrup. on Solid Freeform Fabrication, Dept. of Mech. Eng., Univ. of Texas at Austin, 1996, 491-498.
	SW	Hanan Samet , Robert E. Webber, Hierarchical Data Structures and Algorithms for Computer Graphics. Part I., IEEE Computer Graphics and Applications, v.8 n.3, p.48-68, May 1988 [doi>10.1109/38.513]
	SH	X. SHENG AND B.E. HIRSCH, Triangulation of trimmed surfaces in parametric space, Computer- Aided Design, 24 (1992), 437-444.
	ST	X. SHENG AND U. TUCHOLKE, On triangulating surface model for SLA, Proc. 2rid Int. Conf. on Rapid Prototyping, Dayton, OH, 1991, 236-239.
	Ta	Robert Endre Tarjan, Data structures and network algorithms, Society for Industrial and Applied Mathematics, Philadelphia, PA, 1983
	Te	TECNOMATICS, N.V., Robface: The universal Rob- Cad programming interface, 1988.
	Wo	T.T. WOHLEaS, STL viewers and editors, 1996 (available at http://lamar, colostate, edu/ "wohl e rs / s t I_ view. h tml).