| Clock tree synthesis for multi-chip modules |
| Full text |
Publisher Site
,
Pdf
(221 KB)
|
| Source
|
International Conference on Computer Aided Design
archive
Proceedings of the 1996 IEEE/ACM international conference on Computer-aided design
table of contents
San Jose, California, United States
Pages: 50 - 53
Year of Publication: 1997
ISBN:0-8186-7597-7
|
|
Authors
|
|
Daksh Lehther
|
Department of Electrical & Computer Engineering, Iowa State University, Ames, IA
|
|
Sachin S. Sapatnekar
|
Department of Electrical & Computer Engineering, Iowa State University, Ames, IA
|
|
| Sponsors |
|
| Publisher |
IEEE Computer Society
Washington, DC, USA
|
| Bibliometrics |
Downloads (6 Weeks): 4, Downloads (12 Months): 10, Citation Count: 0
|
|
|
ABSTRACT
While designing interconnect for MCM's, one must take into consideration the distributed RLC effects, due to which signals may display nonmonotonic behavior and substantial ringing. This paper considers the problem of designing clock trees for MCM's. A fully distributed RLC model is utilized for AWE-based analysis and synthesis, and appropriate measures are taken to ensure adequate signal damping and for buffer insertion to satisfy constraints on the clock signal slew rate. Experimental results, verified by SPICE simulations, show that this method can be used to build clock trees with near-zero skews.
REFERENCES
Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.
| |
1
|
|
| |
2
|
R. C. Frye, "Physical Scaling and Interconnection Delays in Multichip Modules," IEEE Transactions on Components, Packaging, and Manufacturing Technology, vol. 17, pp. 30- 37, 1994.
|
| |
3
|
L. T. Pillage and R. A. Rohrer, "Asymptotic Waveform Evaluation for Timing Analysis," IEEE Trans. CAD, vol. 9, pp. 352-365, 1990.
|
| |
4
|
S. Pullela, N. Menezes, J. Omar, and L. T. Pillage, "Skew and Delay Optimization for Reliable Buffered Clock Trees," Proc. ICCAD, pp. 556-562, 1993.
|
| |
5
|
M. Sriram and S. M. Kang, Physical Design Of Multi-Chip Modules, Kluwer Academic Publishers, Boston, MA, 1994.
|
| |
6
|
R.-S. Tsay, "An Exact Zero Skew Clock Routing Algorithm," IEEE Transactions on Computer-Aided Design of Integrated Circuit and Systems, vol. 12, pp. 242-249, 1993.
|
| |
7
|
|
| |
8
|
Qing Zhu , Wayne W.-M. Dai , Joe G. Xi, Optimal sizing of high-speed clock networks based on distributed RC and lossy transmission line models, Proceedings of the 1993 IEEE/ACM international conference on Computer-aided design, p.628-633, November 07-11, 1993, Santa Clara, California, United States
|
|