Conceptual graphs in constraint based re-design

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Conceptual graphs in constraint based re-design

Full text

Pdf (1.08 MB)

Source

ACM Symposium on Solid and Physical Modeling archive
Proceedings of the third ACM symposium on Solid modeling and applications table of contents

Salt Lake City, Utah, United States

Pages: 55 - 64

Year of Publication: 1995

ISBN:0-89791-672-7

Authors

O. W. Salomons	Laboratory of Production and Design Engineering, Department of Mechanical Engineering, University of Twente, The Netherlands
F. van Slooten	Laboratory of Production and Design Engineering, Department of Mechanical Engineering, University of Twente, The Netherlands
F. J. A. M. van Houten	Laboratory of Production and Design Engineering, Department of Mechanical Engineering, University of Twente, The Netherlands
H. J. J. Kals	Laboratory of Production and Design Engineering, Department of Mechanical Engineering, University of Twente, The Netherlands

Sponsor

SIGGRAPH: ACM Special Interest Group on Computer Graphics and Interactive Techniques

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 8, Downloads (12 Months): 28, Citation Count: 0

Additional Information:

references index terms collaborative colleagues

Tools and Actions:	Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/218013.218030 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	AKC92	Anantha R., Kramer G.A., Crawford R., An architecture to represent over, under and fully constrained assemblies, ASME Winter Annual Meeting, 1992, 233-244.
	And93a	Andersson, K., A design language based on engineering terminology, PhD thesis, R.I.T., Stockholm, 1993.
	And93b	Andersson, K., CANDLE - A new tool for conceptual design, proc. of ICED'93, The Hague, 1993 Vol.l, 45-52.
	AP75	Ambler A.P., Popplestone R.J., Inferring the positions of bodies from specified spatial relationships, Artificial intelligence, 6, 1975, 157-I74.
	BHR89	R. E. Billo , M. Henderson , R. Rucker, Applying conceptual graph inferencing to feature-based engineering analysis, Computers in Industry, v.13 n.3, p.195-214, Dec. 1989 [doi>10.1016/0166-3615(89)90111-5]
	Bil89	Billo, R.E., An object -oriented modeling methodology utilizing conceptual graphs for form feature definition, PhD thesis, Arizona State University, 1989.
	CDR91	Clement A., Desrochers A., Rivi~re A., Theory and practice of 3D tolerancing for assembly, CIRP seminar on Computer aided tolerancing, Penn State University, USA, May 1991.
	CJC93	Chamberlain M.A., Joneja A., Chang T-C., Protrusionfeatures handling in design and manufacturing planning, computer aided design, vol. 25, no. 1, 1993, 19- 28.
	CR93	Clement, A., Rivi6re, A., Tolerancing versus nominal modelling in next generation CAD/CAM system, CIRP sere. Comp. Aided qblerancing. Cachan. 1993.97-113.
	CTB92	Cutkosky M.R., Tenenbaum J.M., Brown D.R., Working with multiple representations in a concurrent design system, Journal of Mechanical Design, Vol. 114, 1992, 515 - 524.
	Gau94	Gaunet D., Mod61e formel de tolerancement de position, contributions ~ l'aide au tolerancement des m6canismes en CFAO, in French, PhD thesis, ENS de Cachan, February 1994.
	GSSHK95	Geelink R., Salomons O.W.. Slooten F. van, ttouten F.J.AM. van, Kals H.J.J., Unified feature definition fi~r feature based design and feature based manufactunng, subm., t~ ASME CIE'95 conf., 1995.
	HJP93	Hashim, EM., Juster, N.P., de Pennington, A., Generating design variants based on functional reasoning, proc. of ICED '93. The Hague, Vol. 1, 1993, 60--67.
	Hou91	Houten, F.J.A.M van, PART, a computer aided proces.s planning system, PhD thesis, Univ. of Twente. 1991.
	KL87	H. Ko , K. Lee, Automatic assembling procedure generation from mating conditions, Computer-Aided Design, v.19 n.1, p.3-10, Jan./Feb. 1987 [doi>10.1016/0010-4485(87)90146-1]
	Kra92	Kramer, G.A., 1992, Solving geometric constraint systems. a case study in kinematics, The MIT Press, Cambridge.
	LA85	Kunwoo Lee , Guy Andrews, Inference of the positions of components in an assembly: part 2, Computer-Aided Design, v.17 n.1, p.20-24, Jan./Feb. 1985 [doi>10.1016/0010-4485(85)90006-5]
	LG85	Kunwoo Lee , David C. Gossard, A hierarchical data structure for representing assemblies: part I, Computer-Aided Design, v.17 n.1, p.15-19, Jan./Feb. 1985 [doi>10.1016/0010-4485(85)90005-3]
	LN91	Liu, H-C., Nnaji, B.O., Design with Spatial Relations, J. of Manufact. Systems, Vol. 10, No. 6, 1991,449 463.
	Mul87	G. Mullineux, Optimization scheme for assembling components, Computer-Aided Design, v.19 n.1, p.35-40, Jan./Feb. 1987 [doi>10.1016/0010-4485(87)90151-5]
	OCTG94	Olsen G.R., Cutkosky M., Tenenbaum J.M.. Gruber T.R., Collaborative engineering based on knowledge sharing agreements, proceedings 1994 ASME Database Symposium, Sept. 11-14, Minneapolis MN. 1994, to be obtained via: http://www -ksl.stanford.edu/know ledge sharing/papers/index.html#olsen asme-94.
	PAB80	Popplestone R.J., Ambler A.P., Bellos I.M., An interpreter language for describing assemblies, Artificial Intelligence. 14. 1980, 79- 107.
	PB84	Pahl, G., Beitz, W., Engineering Design, A systematic approach, Springer Verlag, 1994.
	Pop87	Popplestone R.J., The Edinburgh Designer System as a framework for Robotics, Proc. 1987, IEEE Int. Conf. on Robotics and Automation, Vol. 3, 1987, 1972 1977,
	RGDD94	Riviere A., Gaunet D., Dube I., Desrochers A., Une approche matrcielle pour la repr6sentation des zones de tol~ance et des jeux, to appear, 1994.
	Sal95	Salomons O.W., Computer Support in the design of mechanical products, constraint specification and satisfaction in feature based design for manufacturing, PhD thesis, University of Twente, 1995, also available on WWW: http://utwpue.wb, utwente.nl/-otto/thesis/
	SBRU94	Shah J.J., Balakrishnan G., Rogers M.T.. lJrban S.D.. Comparative study of procedural and declarative feature based geometric modeling, proceeedings IFIP WG 5.3 Conf. on Feature modeling and feature recognition in advanced CAD/CAM systems, Vol. 2, Valenciennes, 1994. 647 671.
	Sch92	Schmekel, H., A system for conceptual design based on general and systematic principles of design PhD thesis, Royal Institute of Technology. Stockholm, 1992.
	Ser87	Serrano, D., 1987, Constraint management in conceptual design, PhD thesis, Cambridge, MIT
	SHK93	Salomons, O.W., Houten, EJ.A.M. van, Kals, H.J.J., Review of research in feature-based design, J. of Manufacturing Systems, Vol.12, No.2, 1993, 113-132.
	SJSHK94	Salomons, O.W., Jonker, H.G., Slooten, F. van, Houten, F.J.A.M. van, Kals H.J.J., Interactive feature definition, IFIP WG5.3 Conf. on Feature Modelling & Recognition in Adv. CAD/ CAM systems, Vol. 1, Valenciennes, 1994, pp 181-205.
	SJSHK95	Salomons O.W., Jonge-Poerink H.J., Slooten F. van, Houten F.J.A.M. van, Kals H.J.J., A computer aided tolerancing tool based on kinematics analogies, accepted for 4th CIRP international workshop on computer aided tolerancing, Tokyo, April 1995.
	SKSHK93	O. W. Salomons , J. H. Kappert , F. van Slooten , F. J. A. M. van Houten , H. J. J. Kals, Computer Support in the (Re) Design of Mechanical Products, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, p.91-103, April 20-22, 1993
	Sow84	J. F. Sowa, Conceptual structures: information processing in mind and machine, Addison-Wesley Longman Publishing Co., Inc., Boston, MA, 1984
	SR93	Shah J.J., Rogers M.T., Assembly modeling as an extension of feature based design, Research in Engineering Design, Vol. 5, 1993, 218-237.
	SSHK93	Salomons, O.W., Slooten, E van, Houten, F.J.A.M. van, Kals, H.J.J., A computer support tool for re-design, a prototype system resulting from applying a methodic design approach, proc. of ICED'93, The Hague, Vol.3, 1993, 1559-1570.
	Suh90	Sub, N.P., The principles of design, Oxford University Press, New York 1990.
	TJ93	Thornton, A.C., Johnson A., Constraint specification and satisfaction in embodiment design, proceedings of ICED'93, Vol.3, The Hague, 1993, 1319-1326.
	Ull93	Ullman, D.G., A new view on function modeling, proceedings of ICED '93, The Hague, Vol. 1, 1993, 21-29.