Unified geometric modeling by non-manifold shell operation

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Unified geometric modeling by non-manifold shell operation

Full text

Pdf (1.12 MB)

Source

ACM Symposium on Solid and Physical Modeling archive
Proceedings on the second ACM symposium on Solid modeling and applications table of contents

Montreal, Quebec, Canada

Pages: 75 - 84

Year of Publication: 1993

ISBN:0-89791-584-4

Authors

Masatake Higashi
Hideki Yatomi
Yoshihiro Mizutani
Shin-ichi Murabata

Sponsor

SIGGRAPH: ACM Special Interest Group on Computer Graphics and Interactive Techniques

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 7, Downloads (12 Months): 21, Citation Count: 1

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/164360.164390 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	E.L. Gursoz, Y. Choi, F.B. Prinz: Vertex-based representaton of non-manifold boundaries, in: M.J. Wozny, J.U. Turner, K. Preiss (eds), Geometric Modeling for Product Engineering, North-Holland (1990), pp. 107-130
	2	E. Levent Gursoz , Young Choi , Friedrich B. Pinz, Boolean set operations on non-manifold boundary representation objects, Computer-Aided Design, v.23 n.1, p.33-39, Jan./Feb. 1991 [doi>10.1016/0010-4485(91)90079-C]
	3	M. Higashi, T. Mori, M. Hosaka: Interference Calculation of Surfaces based on their Geometric Properties, in" F. Kimura, A. Rolstadas (eds), Computer Applications in Production and Engineering CAPE'89, North-Holland (1989), pp.275-282
	4	M. Mantyla, Introduction to Solid Modeling, W. H. Freeman & Co., New York, NY, 1988
	5	M. Masuda, et al.: A mathematical theory and applications of non-manifold geometric modeling, in: F.-L. Krause, H. Jansen (eds), Advanced Geometric Modelling for Engineering Applications, North-Holland (1990), pp.78-92
	6	Aristides A. G. Requicha , Jarek R. Rossignac, Solid Modeling and Beyond, IEEE Computer Graphics and Applications, v.12 n.5, p.31-44, September 1992 [doi>10.1109/38.156011]
	7	J.R. Rossignac, M.A. O'Connor: SGC: A dimensionindependent model for pointsets with internal structures and incomplete boundaries, in" M.J. Wozny, J.U. Turner, K. Preiss (eds), Geometric Modeling for Product Engineering, North-Holland (1990), pp. 145-180
	8	Jarek R. Rossignac , Aristides A. G. Requicha, Constructive non-regularized geometry, Computer-Aided Design, v.23 n.1, p.21-32, Jan./Feb. 1991 [doi>10.1016/0010-4485(91)90078-B]
	9	I. Stroud, Modelling with degenerate objects, Computer-Aided Design, v.22 n.6, p.344-351, July/August 1990 [doi>10.1016/0010-4485(90)90085-Q]
	10	K. Weiler: Edge-based data structures for solid modeling in curved-surface environments, IEEE Computer Graphics and Application, Vol. 5, No. 1 (1985), pp.21- 40
	11	K. Weiler: The radial edge structure: A topological representation for non-manifold geometric boundary modeling, in: M.J. Wozny, H.W. McLauglin, J.L. Encamacao (eds), Geometric Modeling for CAD Applications, North-Holland (1988), pp.3-36
	12	K. Weiler: Boundary graph operators for non-manifold geometric modeling topology representations, in: M.J. Wozny, H.W. McLauglin, J.L. Encamacao (eds), Geometric Modeling for CAD Applications, North- Holland (1988), pp.37-66
	13	K. Weiler, D. McLachlan: Selection sets and filters in geometic modeling and their application in a nonmaninifold environment, in: J. Turner, J. Pegna, M. Wozny (eds), Product Modeling for Computer-Aided Design and Manufacturing, North-Holland (1991), pp.117-139
	14	Y. Yamaguti, K. Kobayashi, F. Kimura: Geometric modeling with genemlize~ topology and geometry for product engineering, in: J. Turner, J. Pegna, M. Wozny (eds), Product Modeling for Computer-Aided Design and Manufacturing, North-Holland (1991), pp.97-115