S-parameter based macro model of distributed-lumped networks using exponentially decayed polynomial function

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

S-parameter based macro model of distributed-lumped networks using exponentially decayed polynomial function

Full text

Pdf (493 KB)

Source

Annual ACM IEEE Design Automation Conference archive
Proceedings of the 30th international Design Automation Conference table of contents

Dallas, Texas, United States

Pages: 726 - 731

Year of Publication: 1993

ISBN:0-89791-577-1

Authors

Haifang Liao
Wayne Wei-Ming Dai
Rui Wang
Fung-Yuel Chang

Sponsors

EDAC : Electronic Design Automation Consortium
IEEE-CAS : Circuits & Systems
SIGDA: ACM Special Interest Group on Design Automation

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 12, Downloads (12 Months): 29, Citation Count: 8

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Request Permissions Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/157485.165108 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	J. Dobrowolski, Introduction to Computer Methods for Microwave Circuit Analysis and Design, Artech House, 1991.
	2	J. Robinstein, P. Penfield, and M. Horowitz, "Signal Delay in RC Tree Networks," IEEE Trans. On CAD, Vol. CAD-2, no. 3, July 1983, pp. 202-211.
	3	W. C. Elmore, "The Transient Response of Damped Linear Networks with Particular Regard to Wideband Amplifier," J. Applied Physics, 19(1), 1948.
	4	L. T. Pillage, and R. A. Rohrer, "Asymptotic Waveform Evaluation for Timing Analysis," IEEE Trans. on CAD, Sept. 1990.
	5	Curtis L. Ratzlaff , Nanda Gopal , Lawrence T. Pillage, RICE: Rapid interconnect circuit evaluator, Proceedings of the 28th conference on ACM/IEEE design automation, p.555-560, June 17-22, 1991, San Francisco, California, United States [doi>10.1145/127601.127732]
	6	H. Liao, R. Wang, W. Dai and R. Chandra, "S-Parameter Based Macro Model of Distributed-Lumped Networks Using Pade Approximation," to appear in the Proceedings of International Symposium on Circuits and Systems, 1993
	7	H. Liao and W. Dai, "Wave Spreading Evaluation of Interconnect Systems," to appear in the 3rd 1EEE Multichip-module Conference Proceedings, 1993
	8	E Y. Chang, "Transient Simulation of Nonuniform Coupled Lossy Transmission Lines Characterized with Frequency- Dependent Parameters, Part II: Discrete-T'mae Analysis," to appear in IEEE Trans. on Circuits and Systems, Nov. 1992.
	9	P. Chan, "Comments on 'Asymptotic Waveform Evaluation for Timing Analysis'," rl~F~E Trans. on CAD, Aug. 1991, pp. 1078-1079.
	10	E. Chiprout , M. Nakhla, Generalized moment-matching methods for transient analysis of interconnect networks, Proceedings of the 29th ACM/IEEE conference on Design automation, p.201-206, June 08-12, 1992, Anaheim, California, United States
	11	William H. Press , Saul A. Teukolsky , William T. Vetterling , Brian P. Flannery, Numerical recipes in C (2nd ed.): the art of scientific computing, Cambridge University Press, New York, NY, 1992

CITED BY 9

	M. M. Gourary , S. G. Rusakov , S. L. Ulyanov , M. M. Zharov , B. J. Mulvaney, An optimum fitting algorithm for generation of reduced-order models, Proceedings of the 2001 conference on Asia South Pacific design automation, p.209-213, January 2001, Yokohama, Japan
	Bernie Sheehan, An AWE technique for fast printed circuit board delays, Proceedings of the 33rd annual conference on Design automation, p.539-543, June 03-07, 1996, Las Vegas, Nevada, United States
	Qing Zhu , Wayne W.-M. Dai , Joe G. Xi, Optimal sizing of high-speed clock networks based on distributed RC and lossy transmission line models, Proceedings of the 1993 IEEE/ACM international conference on Computer-aided design, p.628-633, November 07-11, 1993, Santa Clara, California, United States
	Payam Heydari , Massoud Pedram, Calculation of ramp response of lossy transmission lines using two-port network functions, Proceedings of the 1998 international symposium on Physical design, p.152-157, April 06-08, 1998, Monterey, California, United States
	Haifang Liao , Wayne Wei-Ming Dai, Partitioning and reduction of RC interconnect networks based on scattering parameter macromodels, Proceedings of the 1995 IEEE/ACM international conference on Computer-aided design, p.704-709, November 05-09, 1995, San Jose, California, United States
	Haifang Liao , Wayne Wei-Ming Dai, Capturing time-of-flight delay for transient analysis based on scattering parameter macromodel, Proceedings of the 1994 IEEE/ACM international conference on Computer-aided design, p.412-417, November 06-10, 1994, San Jose, California, United States
	Tuyen V. Nguyen, Efficient simulation of lossy and dispersive transmission lines, Proceedings of the 31st annual conference on Design automation, p.622-627, June 06-10, 1994, San Diego, California, United States
	Zhanhai Qin , Chung-Kuan Cheng, RCLK-VJ network reduction with Hurwitz polynomial approximation, Proceedings of the 2003 conference on Asia South Pacific design automation, January 21-24, 2003, Kitakyushu, Japan
	K. L. Shepard , S. M. Carey , E. K. Cho , B. W. Curran , R. F. Hatch , D. E. Hoffman , S. A. McCabe , G. A. Northrop , R. Seigler, Design methodology for the S/390 parallel enterprise server G4 microprocessors, IBM Journal of Research and Development, v.41 n.4-5, p.515-547, July/Sept. 1997