ACM Home Page
Please provide us with feedback. Feedback
High performance on-chip differential signaling using passive compensation for global communication
Full text PdfPdf (195 KB)
Source
Asia and South Pacific Design Automation Conference archive
Proceedings of the 2009 Asia and South Pacific Design Automation Conference table of contents
Yokohama, Japan
SESSION: Signal/power integrity and simulation table of contents
Pages 385-390  
Year of Publication: 2009
ISBN:978-1-4244-2748-2
Authors
Ling Zhang  Univ. of California, San Diego, CA
Yulei Zhang  Univ. of California, San Diego, CA
Akira Tsuchiya  Kyoto Univ., Kyoto, Japan
Masanori Hashimoto  Osaka Univ., Osaka, Japan
Ernest S. Kuh  Univ. of California, Berkeley, CA
Chung-Kuan Cheng  Univ. of California, San Diego, CA
Sponsors
: IEEE Circuits and Systems Society
SIGDA: ACM Special Interest Group on Design Automation
IEICE ESS : Institute of Electronics, Information and Communication Engineers - Engineering Sciences Society
IPSJ SIGSLDM : Information Processing Society of Japan - SIG System LSI Design Methodology
Publisher
IEEE Press  Piscataway, NJ, USA
Bibliometrics
Downloads (6 Weeks): 7,   Downloads (12 Months): 31,   Citation Count: 1
Additional Information:

abstract   references   cited by   collaborative colleagues  

Tools and Actions: Review this Article  

ABSTRACT

To address the performance limitation brought by the scaling issues of on-chip global wires, a new configuration for global wiring using on-chip lossy transmission lines is proposed and optimized. We propose a signaling structure to compensate the distortion and attenuation of on-chip transmission lines, which uses passive compensation and inserts repeated transceivers composing sense amplifiers and inverter chains. An optimization flow for designing this scheme based on eye-diagram prediction and sequential quadratic programming (SQP) is devised. This flow is used to study the latency, power dissipation and throughput performance of the new global wiring scheme as the technology scales from 90 nm to 22 nm. Comparing to repeated RC wire, experimental results demonstrate that at 22 nm technology node, the new scheme can reduce the normalized delay by 80%-95%, the normalized energy consumption by 50%-94%. The normalized latency is 10 ps/mm, the energy per bit is 20 pJ/m, and the throughput is 15 Gbps/μm. All performance metrics are scalable with technology, which makes this approach a potential candidate to break the "interconnect wall" of digital system performance.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

 
1
S. I. Association. (2004, 2006, 2007) International technology roadmap for semiconductors. {Online}. Available: http://www.itrs.net
2
 
3
 
4
 
5
A. Tsuchiya, M. Hashimoto, and H. Onadera, "Design guidline for resistive termination of on-chip high-speed interconnects," in IEEE Custom Integrated Circuits Conference, Sept. 2005, pp. 613--616.
 
6
 
7
 
8
C. C. Liu, H. Zhu, and C. K. Cheng, "Passive compensation for high performance inter-chip communication," in Proceedings. of IEEE International Conference on Computer Design, Oct. 2007, pp. 547--552.
 
9
J. Shin and K. Aygun, "On-package continuous-time linear equalizer using embedded passive components," in IEEE Electrical Performance of Electronic Packaging, Oct. 2007, pp. 147--150.
10
 
11
 
12
 
13
M. Hashimoto, A. Tsuchiya, A. Shinmyo, and H. Onodera, "Performance prediction of on-chip high-throughput global signaling," in IEEE. Electrical Performance of Electronic Packaging, 2005, pp. 79--82.
 
14
M. Hashimoto, A. Tsuchiya, and H. Onodera, "On-chip global signaling by wave pipelining," in IEEE. Electrical Performance of Electronic Packaging, 2004, pp. 311--314.
 
15
H. Ito, J. Inoue, S. Gomi, H. Sugita, K. Okada, and K. Masu, "On-chip transmission line for long global interconnects," in IEEE. Int. Electron Device Meeting, 2004, pp. 677--680.
 
16
M. C. Biggs, "Constrained minimization using recursive quadratic programming: some alternative subproblem formulations," in L. C. W. Dixon and G. P. Szego, eds., Towards global optimization. North-Holland, Amsterdam, 1975.
 
17
 
18
D. Schinkel, E. Mensink, E. Klumperink, E. Tuiji, and B. Nauta, "A double-tail latch-type voltage sense amplifier with 18ps setup+hold time," in IEEE Int. Solid-State Circuits Conf. Dig. Tech. Papers, Feb. 2007, pp. 314--316.
 
19
R. Shi, W. Yu, and C. Cheng, "Accurate prediction of eye-diagram characteristics based on step response," in Proc. IEEE/ACM International Conference on Computer-Aided Design, 2008, pp. 655--661.
 
20
S. Uemura, A. Tsuchiya, and H. Onodera, "A predictive transistor model based on itrs roadmap," in Proceedings of General Conference of IEICE, Mar. 2006, p. 81.
 
21
IBM, "IBM electromagnetic field solver suite of tools," in http://www.alphaworks.ibm.com/tech/eip.
 
22
IBM, "Powerspice user's guide, version 2.0," 2005.

Collaborative Colleagues:
Ling Zhang: colleagues
Yulei Zhang: colleagues
Akira Tsuchiya: colleagues
Masanori Hashimoto: colleagues
Ernest S. Kuh: colleagues
Chung-Kuan Cheng: colleagues