| Synthesis of networks on chips for 3D systems on chips |
| Full text |
Pdf
(350 KB)
|
Source
|
Asia and South Pacific Design Automation Conference
archive
Proceedings of the 2009 Asia and South Pacific Design Automation Conference
table of contents
Yokohama, Japan
SESSION: System-level design of 3D chips and configurable systems
table of contents
Pages 242-247
Year of Publication: 2009
ISBN:978-1-4244-2748-2
|
|
Authors
|
|
Srinivasan Murali
|
LSI, EPFL, Lausanne, Switzerland
|
|
Ciprian Seiculescu
|
LSI, EPFL, Lausanne, Switzerland
|
|
Luca Benini
|
University of Bologna, Bologna, Italy
|
|
Giovanni De Micheli
|
LSI, EPFL, Lausanne, Switzerland
|
|
| Sponsors |
|
| Publisher |
IEEE Press
Piscataway, NJ, USA
|
| Bibliometrics |
Downloads (6 Weeks): 44, Downloads (12 Months): 186, Citation Count: 0
|
|
|
ABSTRACT
Three-dimensional stacking of silicon layers is emerging as a promising solution to handle the design complexity and heterogeneity of Systems on Chips (SoCs). Networks on Chips (NoCs) are necessary to efficiently handle the 3D interconnect complexity. Designing power efficient NoCs for 3D SoCs that satisfy the application performance requirements, while satisfying the 3D technology constraints is a big challenge. In this work, we address this problem and present a synthesis approach for designing power-performance efficient 3D NoCs. We present methods to determine the best topology, compute paths and perform placement of the NoC components in each 3D layer. We perform experiments on varied, realistic SoC benchmarks to validate the methods and also perform a comparative study of the resulting 3D NoC designs with 3D optimized mesh topologies. The NoCs designed by our synthesis method results in large interconnect power reduction (average of 38%) and latency reduction (average of 25%) when compared to traditional NoC designs.
REFERENCES
Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.
| |
1
|
|
 |
2
|
|
| |
3
|
|
| |
4
|
Kees Goossens , John Dielissen , Om Prakash Gangwal , Santiago Gonzalez Pestana , Andrei Radulescu , Edwin Rijpkema, A Design Flow for Application-Specific Networks on Chip with Guaranteed Performance to Accelerate SOC Design and Verification, Proceedings of the conference on Design, Automation and Test in Europe, p.1182-1187, March 07-11, 2005
[doi> 10.1109/DATE.2005.11]
|
| |
5
|
Stergios Stergiou , Federico Angiolini , Salvatore Carta , Luigi Raffo , Davide Bertozzi , Giovanni De Micheli, ×pipes Lite: A Synthesis Oriented Design Library For Networks on Chips, Proceedings of the conference on Design, Automation and Test in Europe, p.1188-1193, March 07-11, 2005
[doi> 10.1109/DATE.2005.1]
|
| |
6
|
|
 |
7
|
|
| |
8
|
|
| |
9
|
Davide Bertozzi , Antoine Jalabert , Srinivasan Murali , Rutuparna Tamhankar , Stergios Stergiou , Luca Benini , Giovanni De Micheli, NoC Synthesis Flow for Customized Domain Specific Multiprocessor Systems-on-Chip, IEEE Transactions on Parallel and Distributed Systems, v.16 n.2, p.113-129, February 2005
[doi> 10.1109/TPDS.2005.22]
|
| |
10
|
|
| |
11
|
|
 |
12
|
|
| |
13
|
|
 |
14
|
|
 |
15
|
|
| |
16
|
J. Xu et al., "A design methodology for application-specific networks-on-chip", ACM TECS, May 2006.
|
 |
17
|
Srinivasan Murali , Paolo Meloni , Federico Angiolini , David Atienza , Salvatore Carta , Luca Benini , Giovanni De Micheli , Luigi Raffo, Designing application-specific networks on chips with floorplan information, Proceedings of the 2006 IEEE/ACM international conference on Computer-aided design, November 05-09, 2006, San Jose, California
[doi> 10.1145/1233501.1233573]
|
| |
18
|
|
| |
19
|
K. Banerjee et al., "3-D ICs: ANovel Chip Design for Deep-Submicrometer Interconnect Performance & SoC Integration", Proc. of IEEE, 2001.
|
 |
20
|
|
| |
21
|
|
| |
22
|
|
| |
23
|
|
| |
24
|
Pingqiang Zhou , Yuchun Ma , Zhouyuan Li , Robert P. Dick , Li Shang , Hai Zhou , Xianlong Hong , Qiang Zhou, 3D-STAF: scalable temperature and leakage aware floorplanning for three-dimensional integrated circuits, Proceedings of the 2007 IEEE/ACM international conference on Computer-aided design, November 05-08, 2007, San Jose, California
|
| |
25
|
N. Miyakawa et al., "New Multi-Layer Stacking Technology and Trial Manufacture", 3-D Architectures for Semiconductor Integration and Packaging, Oct 2007.
|
| |
26
|
Roshan Weerasekera , Li-Rong Zheng , Dinesh Pamunuwa , Hannu Tenhunen, Extending systems-on-chip to the third dimension: performance, cost and technological tradeoffs, Proceedings of the 2007 IEEE/ACM international conference on Computer-aided design, November 05-08, 2007, San Jose, California
|
| |
27
|
V. F. Pavlidis and E. G. Friedman, "Topologies for networks-onchip", Proc. SOCC, 2006.
|
| |
28
|
|
| |
29
|
C. Addo-Quaye, "Thermal-Aware Mapping and Placement for 3-D NoC Designs", Proc. SOCC, 2005.
|
| |
30
|
J. Kim et al., "A novel dimensionally-decomposed router for on-chip communication in 3d architectures", ISCA, 2007.
|
 |
31
|
Feihui Li , Chrysostomos Nicopoulos , Thomas Richardson , Yuan Xie , Vijaykrishnan Narayanan , Mahmut Kandemir, Design and Management of 3D Chip Multiprocessors Using Network-in-Memory, Proceedings of the 33rd annual international symposium on Computer Architecture, p.130-141, June 17-21, 2006
|
 |
32
|
Dongkook Park , Soumya Eachempati , Reetuparna Das , Asit K. Mishra , Yuan Xie , N. Vijaykrishnan , Chita R. Das, MIRA: A Multi-layered On-Chip Interconnect Router Architecture, Proceedings of the 35th International Symposium on Computer Architecture, p.251-261, June 21-25, 2008
|
| |
33
|
|
| |
34
|
|
| |
35
|
Package available at: http://sourceforge.net/projects/lpsolve
|
| |
36
|
S. N. Adya, I. L. Markov, "Fixed-outline Floorplanning: Enabling Hierarchical Design", IEEE TVLSI, Dec 2003.
|
|