Design flow management in the NELSIS CAD framework

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Design flow management in the NELSIS CAD framework

Full text

Pdf (712 KB)

Source

Annual ACM IEEE Design Automation Conference archive
Proceedings of the 28th ACM/IEEE Design Automation Conference table of contents

San Francisco, California, United States

Pages: 711 - 716

Year of Publication: 1991

ISBN:0-89791-395-7

Authors

K. O. ten Bosch	Delft University of Technology, DIMES Design and Test Centre, Feldmannweg 17, 2628 CT Delft, The Netherlands
P. Bingley	Delft University of Technology, DIMES Design and Test Centre, Feldmannweg 17, 2628 CT Delft, The Netherlands
P. van der Wolf	Delft University of Technology, DIMES Design and Test Centre, Feldmannweg 17, 2628 CT Delft, The Netherlands

Sponsors

SIGDA: ACM Special Interest Group on Design Automation
IEEE-CS : Computer Society

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 4, Downloads (12 Months): 17, Citation Count: 21

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Request Permissions Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/127601.127756 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	F. Bretsclmeider, et al., "Knowledge Based Design Flow Management," Proc. ICCAD - 90, (1990).
	2	J. Daniell , S. W. Director, An object oriented approach to CAD tool control within a design framework, Proceedings of the 26th ACM/IEEE conference on Design automation, p.197-202, June 25-28, 1989, Las Vegas, Nevada, United States [doi>10.1145/74382.74416]
	3	M. Bushnell and S.W. Director, "Automated Design Tool Execution in the Ulysses Design Environment," IEEE Trans. on Computer-Aided Design 8(3)(March 1989).
	4	Alberto Di Janni, A monitor for complex CAD systems, Proceedings of the 23rd ACM/IEEE conference on Design automation, p.145-151, July 1986, Las Vegas, Nevada, United States
	5	P. van den Hamer and M.A. Treffers, "A Data Flow Based Architecture for CAD Frameworks," Proc. ICCAD - 90, (1990).
	6	J. H. ter Bekke, Semantic data modeling, Prentice-Hall, Inc., Upper Saddle River, NJ, 1992
	7	P. van der Wolf , T. G. R. van Leuken, Object type oriented data modeling for VLSI data management, Proceedings of the 25th ACM/IEEE conference on Design automation, p.351-356, June 12-15, 1988, Atlantic City, New Jersey, United States
	8	CFI Design Methodology Management TSC, "Tool Abstraction Specification (Draft Proposal)," Document 51, Version 0.21, (February 5, 1991).
	9	P. van der Wolf , P. Bingley , P. Dewilde, On the architecture of a CAD framework: the NELSIS approach, Proceedings of the conference on European design automation, March 12-15, 1990, Glasgow, Scotland
	10	P. van der Wolf , G. W. Sloof , P. Bingley , P. Dewilde, Meta data management in the NELSIS CAD framework, Proceedings of the 27th ACM/IEEE conference on Design automation, p.142-149, June 24-27, 1990, Orlando, Florida, United States [doi>10.1145/123186.123242]
	11	N. van der Meijs, P. van der Wolf, I. Widya, and P. Dewilde, "A Data Management Interface to Facilitate CAD/IC Software Exchanges," Proc. ICCD '87, (1987).

CITED BY 21

	Bart Kienhuis , Ed Deprettere , Kees Vissers , Pieter van der Wolf, The construction of a retargetable simulator for an architecture template, Proceedings of the 6th international workshop on Hardware/software codesign, p.125-129, March 15-18, 1998, Seattle, Washington, United States
	Peter R. Sutton , Stephen W. Director, Framework encapsulations: a new approach to CAD tool interoperability, Proceedings of the 35th annual conference on Design automation, p.134-139, June 15-19, 1998, San Francisco, California, United States
	Elisabeth Kupitz , Jürgen Tacken, DECOR — tightly integrated Design Control and Observation, Proceedings of the 1992 IEEE/ACM international conference on Computer-aided design, p.532-537, November 1992, Santa Clara, California, United States
	Peter Bingley , Olav ten Bosch , Pieter van der Wolf, Incorporating design flow management in a framework based CAD system, Proceedings of the 1992 IEEE/ACM international conference on Computer-aided design, p.538-545, November 1992, Santa Clara, California, United States
	Remco Quester, obTIOS: a CAx-framework service for building concurrent engineering environments, ACM SIGSOFT Software Engineering Notes, v.17 n.5, p.32-40, Dec. 1992
	E. W. Johnson , J. B. Brockman, Measurement and analysis of sequential design processes, ACM Transactions on Design Automation of Electronic Systems (TODAES), v.3 n.1, p.1-20, Jan. 1998
	Peter R. Sutton , Jay B. Brockman , Stephen W. Director, Design management using dynamically defined flows, Proceedings of the 30th international conference on Design automation, p.648-653, June 14-18, 1993, Dallas, Texas, United States
	M. Ryba , U. Baitinger, An integrated concept for design project planning and design flow control, Proceedings of the conference on European design automation, p.98-103, September 1996, Geneva, Switzerland
	Juan Antonio Carballo , Stephen W. Director, Application of constraint-based heuristics in collaborative design, Proceedings of the 38th conference on Design automation, p.395-400, June 2001, Las Vegas, Nevada, United States
	Eric W. Johnson , Luis A. Castillo , Jay B. Brockman, Application of a Markov model to the measurement, simulation, and diagnosis of an iterative design process, Proceedings of the 33rd annual conference on Design automation, p.185-188, June 03-07, 1996, Las Vegas, Nevada, United States
	Pieter van der Wolf , Olav ten Bosch , Alfred van der Hoeven, An enhanced flow model for constraint handling in hierarchical multi-view design environments, Proceedings of the 1994 IEEE/ACM international conference on Computer-aided design, p.500-507, November 06-10, 1994, San Jose, California, United States
	Juan Antonio Carballo , Stephen W. Director, Constraint management for collaborative electronic design, Proceedings of the 36th ACM/IEEE conference on Design automation, p.529-534, June 21-25, 1999, New Orleans, Louisiana, United States
	Reid Baldwin , Moon Jung Chung, Design methodology management using graph grammars, Proceedings of the 31st annual conference on Design automation, p.472-478, June 06-10, 1994, San Diego, California, United States
	Peter R. Sutton , Stephen W. Director, A description language for design process management, Proceedings of the 33rd annual conference on Design automation, p.175-180, June 03-07, 1996, Las Vegas, Nevada, United States
	A. J. van der Hoeven , Olav ten Bosch , Rene van Leuken , Pieter van der Wolf, A flexible access control mechanism for CAD frameworks, Proceedings of the conference on European design automation, p.188-193, September 19-23, 1994, Grenoble, France
	Reid A. Baldwin , Moon Jung Chung, A Formal Approach to Managing Design Processes, Computer, v.28 n.2, p.54-63, February 1995
	Olav ten Bosch , Pieter van der Wolf , Peter Bingley, A flow-based user interface for efficient execution of the design cycle, Proceedings of the 1993 IEEE/ACM international conference on Computer-aided design, p.356-363, November 07-11, 1993, Santa Clara, California, United States
	V. Shepelev , S. Director, Automatic workflow generation, Proceedings of the conference on European design automation, p.104-109, September 1996, Geneva, Switzerland
	Eric W. Johnson , Jay B. Brockman, Incorporating design schedule management into a flow management system, Proceedings of the 32nd ACM/IEEE conference on Design automation, p.82-87, June 12-16, 1995, San Francisco, California, United States
	E. Kwee-Christoph , F. Feldbusch , R. Kumar , A. Kunzmann, Generic design flows for project management in a framework environment, Proceedings of the 1995 European conference on Design and Test, p.280, March 06-09, 1995
	A. Kunzmann , R. Seepold, Enhanced functionality by coupling the JESSI-COMMON-Framework with an ECAD framework, Proceedings of the 1995 European conference on Design and Test, p.285, March 06-09, 1995