Meta data management in the NELSIS CAD framework

Subscribe (Full Service)


	Search: The ACM Digital Library The Guide

	Feedback

Meta data management in the NELSIS CAD framework

Full text

Pdf (580 KB)

Source

Annual ACM IEEE Design Automation Conference archive
Proceedings of the 27th ACM/IEEE Design Automation Conference table of contents

Orlando, Florida, United States

Pages: 142 - 149

Year of Publication: 1991

ISBN:0-89791-363-9

Authors

P. van der Wolf	Delft University of Technology, Department of Electrical Engineering, Mekelweg 4, 2628 CD Delft, The Netherlands
G. W. Sloof	Delft University of Technology, Department of Electrical Engineering, Mekelweg 4, 2628 CD Delft, The Netherlands
P. Bingley	Delft University of Technology, Department of Electrical Engineering, Mekelweg 4, 2628 CD Delft, The Netherlands
P. Dewilde	Delft University of Technology, Department of Electrical Engineering, Mekelweg 4, 2628 CD Delft, The Netherlands

Sponsors

SIGDA: ACM Special Interest Group on Design Automation
IEEE-CS : Computer Society

Publisher

ACM New York, NY, USA

Bibliometrics

Downloads (6 Weeks): 1, Downloads (12 Months): 13, Citation Count: 10

Additional Information:

references cited by index terms collaborative colleagues

Tools and Actions:	Request Permissions Review this Article Save this Article to a Binder Display Formats: BibTeX EndNote ACM Ref

DOI Bookmark:	Use this link to bookmark this Article: http://doi.acm.org/10.1145/123186.123242 What is a DOI?

REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

	1	D.S. Harrison, P. Moore, R.L. Spickelmier, and A.R. Newton, "Data Managerner~t and Graphics Editing in the Berkeley Design Environment," Proc. IEEE ICCAD-86, pp. 24-27 (1986).
	2	J. Miller , K. Groning , G. Schulz , C. White, The object-oriented integration methodology of the Cadlab work station design environment, Proceedings of the 26th ACM/IEEE conference on Design automation, p.807-810, June 25-28, 1989, Las Vegas, Nevada, United States [doi>10.1145/74382.74535]
	3	P. van der Wolf , T. G. R. van Leuken, Object type oriented data modeling for VLSI data management, Proceedings of the 25th ACM/IEEE conference on Design automation, p.351-356, June 12-15, 1988, Atlantic City, New Jersey, United States
	4	P. van der Wolf , P. Bingley , P. Dewilde, On the architecture of a CAD framework: the NELSIS approach, Proceedings of the conference on European design automation, March 12-15, 1990, Glasgow, Scotland
	5	R. H. Katz , M. Anwarrudin , E. Chang, A version server for computer-aided design data, Proceedings of the 23rd ACM/IEEE conference on Design automation, p.27-33, July 1986, Las Vegas, Nevada, United States
	6	D. S. Batory , Won Kim, Modeling concepts for VLSI CAD objects, ACM Transactions on Database Systems (TODS), v.10 n.3, p.322-346, Sept. 1985 [doi>10.1145/3979.4018]
	7	J. H. ter Bekke, Semantic data modeling, Prentice-Hall, Inc., Upper Saddle River, NJ, 1992
	8	N. van der Meijs, T.G.R. van Leuken, P. van der Wolf, I. Widya, and P. Dewilde, "A Data Management Interface to Facilitate CAD/IC Software Exchanges," Proc. IEEE ICCD '87, pp. 403-406 (1987).
	9	P. Bingley and P. van der Wolf, "A Design Platform for the NELSIS CAD Framework," Proc. 27th DAC, (June 1990).
	10	M. Silva , D. Gedye , R. Katz , R. Newton, Protection and versioning for OCT, Proceedings of the 26th ACM/IEEE conference on Design automation, p.264-269, June 25-28, 1989, Las Vegas, Nevada, United States [doi>10.1145/74382.74427]
	11	Mario Silva, Private Communication. August 1989.

CITED BY 10

	K. O. ten Bosch , P. Bingley , P. van der Wolf, Design flow management in the NELSIS CAD framework, Proceedings of the 28th conference on ACM/IEEE design automation, p.711-716, June 17-22, 1991, San Francisco, California, United States
	Bernd Schürmann , Joachim Altmeyer, Modeling design tasks and tools: the link between product and flow model, Proceedings of the 34th annual conference on Design automation, p.564-569, June 09-13, 1997, Anaheim, California, United States
	Peter Bingley , Olav ten Bosch , Pieter van der Wolf, Incorporating design flow management in a framework based CAD system, Proceedings of the 1992 IEEE/ACM international conference on Computer-aided design, p.538-545, November 1992, Santa Clara, California, United States
	Peter R. Sutton , Jay B. Brockman , Stephen W. Director, Design management using dynamically defined flows, Proceedings of the 30th international conference on Design automation, p.648-653, June 14-18, 1993, Dallas, Texas, United States
	Remco Quester, obTIOS: a CAx-framework service for building concurrent engineering environments, ACM SIGSOFT Software Engineering Notes, v.17 n.5, p.32-40, Dec. 1992
	Robert C. Armstrong , Jonathan Allen, FICOM: a framework for incremental consistency maintenance in multi-representation, structural VLSI databases, Proceedings of the 1992 IEEE/ACM international conference on Computer-aided design, p.336-343, November 1992, Santa Clara, California, United States
	Pieter van der Wolf , Olav ten Bosch , Alfred van der Hoeven, An enhanced flow model for constraint handling in hierarchical multi-view design environments, Proceedings of the 1994 IEEE/ACM international conference on Computer-aided design, p.500-507, November 06-10, 1994, San Jose, California, United States
	Venu Vasudevan , Yves Mathys , Jim Tolar, DAMOCLES: an observer-based approach to design tracking, Proceedings of the 1992 IEEE/ACM international conference on Computer-aided design, p.546-551, November 1992, Santa Clara, California, United States
	Bernd Kleinjohann , Elisabeth Kupitz, Tool communication in an integrated synthesis environment, Proceedings of the conference on European design automation, February 25-28, 1991, Amsterdam, The Netherlands
	Y. Mathys , M. Morgan , S. Soudagar, Controlling change propagation and project policies in IC design, Proceedings of the 1995 European conference on Design and Test, p.274, March 06-09, 1995