ACM Home Page
Please provide us with feedback. Feedback
Architectural and technology influence on the optimal total power consumption
Full text PdfPdf (285 KB)
Source Design, Automation, and Test in Europe archive
Proceedings of the conference on Design, automation and test in Europe: Proceedings table of contents
Munich, Germany
SESSION: Leakage-aware circuit design table of contents
Pages: 989 - 994  
Year of Publication: 2006
ISBN:3-9810801-0-6
Authors
Schuster Christian  University of Neuchâtel, Switzerland
Nagel Jean-Luc  University of Neuchâtel, Switzerland
Piguet Christian  CSEM, Neuchâtel, Switzerland
Farine Pierre-André  University of Neuchâtel, Switzerland
Sponsors
: The EDA Consortium
EDAA : European Design and Automation Association
IEEE-CS\DATC : The IEEE Computer Society
Publisher
European Design and Automation Association  3001 Leuven, Belgium, Belgium
Bibliometrics
Downloads (6 Weeks): 3,   Downloads (12 Months): 14,   Citation Count: 0
Additional Information:

abstract   references   collaborative colleagues  

Tools and Actions: Review this Article  

ABSTRACT

In this paper, an approximated closed-form total power consumption equation for circuits working at their optimal supply and threshold voltage is presented. Comparisons of this formula to the numerical calculation show an error less than 3% on a set of thirteen 16 bit multipliers. Starting from this equation the influence of architecture transformations (including pipelining, parallelization, sequentialization) on the optimal total power is discussed. Finally, by a similar approach, the impact of the technology choice on achievable power saving is considered, showing how a moderated tradeoff between leakage and speed is the key characteristic of a good low power technology.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

 
1
K. Roy, A. Agarwal, C. H. Kim. Circuit Techniques for Leakage Reduction, chapter 13 of Low-Power Electronics Design, CRC Press, edited by C. Piguet, 2005.
 
2
A. P. Chandrakasan, R. B. Low Power CMOS Digital Design. IEEEJSSC, 473--484, vol. 27, no.4, April 1992.
3
4
 
5
C. Schuster, J.-L. Nagel, C. Piguet, P.-A. Farine. Leakage reduction at the architectural level and its application to 16 bit multiplier architectures. Proc. Int'l Workshop on Power and Timing Modeling, Optimization and Simulation, Santorini Island, Greece, September 15--17, 2004.
 
6
C. Piguet, C. Schuster, J-L. Nagel. Optimizing Architecture Activity and Logic Depth for Static and Dynamic Power Reduction. Proc. of the 2nd Northeast Workshop on Circuits and Systems, NewCAS'04, June 20--23, 2004, Montréal, Canada.
 
7
C. Schuster, J.-L. Nagel, C. Piguet, P.-A. Farine. An Architecture Design Methodology for Minimal Total Power Consumption at Fixed Vdd and Vth. Journal of Low Power Electronics, Vol.1 No.1, April, 2005.
Collaborative Colleagues:
Schuster Christian: colleagues
Nagel Jean-Luc: colleagues
Piguet Christian: colleagues
Farine Pierre-André: colleagues