ACM Home Page
Please provide us with feedback. Feedback
A new algorithm for improved VDD assignment in low power dual VDD systems
Full text PdfPdf (321 KB)
Source
International Symposium on Low Power Electronics and Design archive
Proceedings of the 2004 international symposium on Low power electronics and design table of contents
Newport Beach, California, USA
SESSION: Power-efficient bus design table of contents
Pages: 200 - 205  
Year of Publication: 2004
ISBN:1-58113-929-2
Authors
Sarvesh H. Kulkarni  University of Michigan, Ann Arbor, MI
Ashish N. Srivastava  University of Michigan, Ann Arbor, MI
Dennis Sylvester  University of Michigan, Ann Arbor, MI
Sponsors
ACM: Association for Computing Machinery
SIGDA: ACM Special Interest Group on Design Automation
Publisher
ACM  New York, NY, USA
Bibliometrics
Downloads (6 Weeks): 5,   Downloads (12 Months): 29,   Citation Count: 10
Additional Information:

abstract   references   cited by   index terms   collaborative colleagues  

Tools and Actions: Request Permissions Request Permissions    Review this Article  
DOI Bookmark: Use this link to bookmark this Article: http://doi.acm.org/10.1145/1013235.1013287
What is a DOI?

ABSTRACT

We present the first in-depth study of the two existing algorithms, namely, Clustered Voltage Scaling (CVS) and Extended Clustered Voltage Scaling (ECVS), used for assigning the voltage supply to gates in integrated circuits having dual power supplies. We present a comparison of the achievable power savings using these algorithms on various benchmark circuits and first point out that ECVS does provide appreciably larger power improvements compared to CVS. We then provide a new algorithm based on ECVS that further improves the power savings by efficient assignment of the power supplies to the gates. Our new algorithm provides up to 66% power reduction and improves the power savings by up to 28% and 13% with respect to CVS and ECVS respectively. Furthermore, since level conversion is an essential component of dual power supply systems we also present the first circuit-specific sensitivity study of achievable power savings to the energy and delay penalties imposed by level conversion.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

1
 
2
 
3
K. Usami, M. Igarashi, F. Minami, M. Ishikawa, M. Ichida and K. Nogami, "Automated low-power technique exploiting multiple supply voltages applied to a media processor," IEEE JSSC, pp. 463--472, Mar. 1998.
 
4
M.R. Bai and D. Sylvester, "Analysis and design of level converting flip-flops for dual-Vdd/Vth integrated circuits," Proc. International Symposium on System-on-Chip, pp. 151--154, 2003.
5
6
 
7
M. Hamada, Y. Ootaguro and T. Kuroda, "Utilizing surplus timing for power reduction," Proc. CICC, pp. 89--92, 2001.
 
8
M. Takahashi, M. Hamada, T. Nishikawa, H. Arakida, T. Fujita, F. Hatori, et al., "A 60-mW MPEG4 video codec using clustered voltage scaling with variable supply-voltage scheme," IEEE JSSC, pp. 1772--1780, Nov. 1998.
 
9
T. Kuroda and M. Hamada, "Low-power CMOS digital design with dual embedded adaptive power supplies," IEEE JSSC, pp. 652--655, Apr. 2000.
10
 
11
D. Sylvester and K. Keutzer, "System-level performance modeling with BACPAC -- Berkeley advanced chip performance calculator," International Workshop on System-Level Interconnect Prediction (workshop notes), pp. 109--114, 1999.
 
12
F. Brglez and H. Fujiwara, "A neural netlist of 10 combinational benchmark circuits and a target translator in Fortran," Proc. ISCAS, pp. 695--698, May 1985.
 
13
J. Fishburn and A. Dunlop, "TILOS: a posynomial programming approach to transistor sizing," Proc. ICCAD, pp. 326--328, 1985.
14
 
15

CITED BY  10

Collaborative Colleagues:
Sarvesh H. Kulkarni: colleagues
Ashish N. Srivastava: colleagues
Dennis Sylvester: colleagues