ACM Home Page
Please provide us with feedback. Feedback
4T-decay sensors: a new class of small, fast, robust, and low-power, temperature/leakage sensors
Full text PdfPdf (170 KB)
Source
International Symposium on Low Power Electronics and Design archive
Proceedings of the 2004 international symposium on Low power electronics and design table of contents
Newport Beach, California, USA
SESSION: Technologies and devices for low-power table of contents
Pages: 108 - 113  
Year of Publication: 2004
ISBN:1-58113-929-2
Authors
Stefanos Kaxiras  University of Patras, Greece
Polychronis Xekalakis  University of Patras, Greece
Sponsors
ACM: Association for Computing Machinery
SIGDA: ACM Special Interest Group on Design Automation
Publisher
ACM  New York, NY, USA
Bibliometrics
Downloads (6 Weeks): 5,   Downloads (12 Months): 20,   Citation Count: 4
Additional Information:

abstract   references   cited by   index terms   collaborative colleagues  

Tools and Actions: Request Permissions Request Permissions    Review this Article  
DOI Bookmark: Use this link to bookmark this Article: http://doi.acm.org/10.1145/1013235.1013268
What is a DOI?

ABSTRACT

We present a novel temperature/leakage sensor, developed for high-speed, low-power, monitoring of processors and complex VLSI chips. The innovative idea is the use of 4T SRAM cells to measure on-chip temperature and leakage.Using the dependence of leakage currents to temperature, we measure varying decay (discharge) times of the 4T cell at different temperatures. Thus, decaying 4T sensors provide a digital pulse whose frequency depends on temperature. Because of the sensors' very small size, we can easily embed them in many structures thus obtaining both redundancy and a fine-grain thermal picture of the chip. A significant advantage of our sensor design is that it is insensitive to process variations at high temperatures. It is also relatively robust to noise. We propose mechanisms to measure temperature that exploit the sensor's small size and speed to increase measurement reliability. Decaying 4T sensors also provide a measurement of the level of leakage at their sensing area, allowing us to adjust leakage-control policies. Our 4T sensors are significantly smaller, faster, more reliable, and power efficient compared to the best previously proposed designs enabling new approaches to architectural-level thermal and leakage management.


REFERENCES

Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.

1
 
2
 
3
 
4
A. Bakker, J. Huijsing "High-Accuracy CMOS Smart Temperature Sensors." Kluwer Academic Publishers, Boston.
 
5
 
6
 
7
G.M. Quenot, N. Paris, and B. Zavidovique "A temperature and voltage measurement cell for VLSI circuits." In Proc. Euro-Asic '91. pp. 334--338, 1991.
 
8
K. Arabi and B. Kaminska "Built-in temperature and current sensors for on-line oscillation testing." In Proc. 2nd IEEE Int. On-line Testing Workshop, July 1996.
9
 
10
 
11
Weidong Liu, et al. "BSIM3v3.2 MOSFET Model User's Manual," Dept. of EE and CS, U.C. Berkeley.
12
13
14
 
15
 
16
Transmeta Corporation Demonstrates New Technique To Control Transistor Leakage, http://investor.transmeta.com/news/20031014-119967.cfm


Collaborative Colleagues:
Stefanos Kaxiras: colleagues
Polychronis Xekalakis: colleagues