| Wake-up protocols for controlling current surges in MTCMOS-based technology |
| Full text |
Pdf
(390 KB)
|
| Source
|
Asia and South Pacific Design Automation Conference
archive
Proceedings of the 2005 Asia and South Pacific Design Automation Conference
table of contents
Shanghai, China
SESSION: Synthesis for low power
table of contents
Pages: 868 - 871
Year of Publication: 2005
ISBN:0-7803-8737-6
|
|
Authors
|
|
| Sponsors |
|
| Publisher |
|
| Bibliometrics |
Downloads (6 Weeks): 0, Downloads (12 Months): 18, Citation Count: 1
|
|
|
ABSTRACT
This paper proposes strategies to control the wake-up noise for circuits implemented in MTCMOS technology. In MTCMOS circuits, during the switchings between the active and standby modes, sudden surges in current happens due to floating voltages at the nodes. These surges might violate the reliability of the circuit. In this paper we address the above problem by developing wake-up strategies to control these current surges as the circuit is getting turned on. Through gradually turning on a circuit a smaller current will be drawn from the power-grid network. A novel partitioning technique is proposed for MTCMOS circuits under a given constraint of maximum drawn-current from the power-grid network. Two approaches are proposed in this paper; the optimal ILP-based formulation and a polynomial-time heuristic. Experimental results show that up to 90.7% improvement in peak drawn-current is obtained with a maximum of 4 clock cycles time to turn on the circuit. Also result show the effectiveness of the heuristic in terms of the quality of solution and a run-time of up to 6600 times faster than the ILP approach for larger circuits.
REFERENCES
Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.
 |
1
|
Anantha Chandrakasan , Isabel Yang , Carlin Vieri , Dimitri Antoniadis, Design considerations and tools for low-voltage digital system design, Proceedings of the 33rd annual conference on Design automation, p.113-118, June 03-07, 1996, Las Vegas, Nevada, United States
[doi> 10.1145/240518.240540]
|
| |
2
|
|
| |
3
|
H. Su, S. Sapatnekar, S. Nassif. "Optimal Decoupling Capacitor Sizing and Placement for Standard Cell Layout Designs". pages 847--853, Aug 1995.
|
| |
4
|
M. Anis, M. Elmasry. "Multi-Threshold CMOS Digital Circuits-Managing Leakge Power". In Norwell, MA: Kulwer, June 2003.
|
 |
5
|
|
| |
6
|
S. Mutah, T. Douseki, Y. Matsuya, T. Aoki, S. Shigematsu and J. Yamada. "1-V Power Supply High-Speed Digital Circuit Technolofy with Multi-Threshold Voltage CMOS". In IEEE J. Solid-State Circuits, pages 847--853, Aug 1995.
|
| |
7
|
S. Zhao, K. Roy, C. Koh. "Decoupling Capacitance Allocation and Its Application to Power Supply Noise Aware Floorplanning". In IEEE Trans. on Computer Aided Design of Integrated Circuits and Systems (Special Issue on Physical Design, pages 81--92, Jan 2002.
|
|