| Power driven placement with layout aware supply voltage assignment for voltage island generation in Dual-Vdd designs |
| Full text |
Pdf
(470 KB)
|
| Source
|
Asia and South Pacific Design Automation Conference
archive
Proceedings of the 2006 Asia and South Pacific Design Automation Conference
table of contents
Yokohama, Japan
SESSION: Power optimization of large-scale circuits
table of contents
Pages: 582 - 587
Year of Publication: 2006
ISBN:0-7803-9451-8
|
|
Authors
|
|
| Sponsors |
|
| Publisher |
IEEE Press
Piscataway, NJ, USA
|
| Bibliometrics |
Downloads (6 Weeks): 4, Downloads (12 Months): 39, Citation Count: 6
|
|
|
ABSTRACT
In this paper we propose a method for standard cell placement with support for dual supply voltages, aiming to reduce total power under timing constraints and to implement voltage islands with minimal overheads. The method begins with timing and power driven coarse placement, followed by a few iterations between voltage assignment and placement refinement to generate voltage islands. Several techniques, including timing and power driven net weighting, seed growth based voltage assignment, and soft clustering strategy for placement refinements are employed in our implementation. Experimental results on a set of MCNC benchmarks show that our approach is able to produce feasible placement for dual-Vdd designs and significantly reduce total power with a wirelength increase within 14% compared to a power and timing driven placer without voltage islands.
REFERENCES
Note: OCR errors may be found in this Reference List extracted from the full text article. ACM has opted to expose the complete List rather than only correct and linked references.
 |
1
|
|
| |
2
|
|
 |
3
|
David E. Lackey , Paul S. Zuchowski , Thomas R. Bednar , Douglas W. Stout , Scott W. Gould , John M. Cohn, Managing power and performance for System-on-Chip designs using Voltage Islands, Proceedings of the 2002 IEEE/ACM international conference on Computer-aided design, p.195-202, November 10-14, 2002, San Jose, California
[doi> 10.1145/774572.774601]
|
 |
4
|
|
 |
5
|
Ashish Srivastava , Dennis Sylvester , David Blaauw, Power minimization using simultaneous gate sizing, dual-Vdd and dual-Vth assignment, Proceedings of the 41st annual conference on Design automation, June 07-11, 2004, San Diego, CA, USA
[doi> 10.1145/996566.996777]
|
| |
6
|
S. K. Mathew, M. A. Anders, B. Bloechel, T. Nguyen, R. K. Krishnamurthy and S. Borkar, "A 4-GHz 300-mW 64-bit integer execution ALU with dual supply voltages in 90-nm CMOS," IEEE J. Solid-State Circuits, vol. 40, pp.44--51, Jan. 2005.
|
 |
7
|
Ruchir Puri , Leon Stok , John Cohn , David Kung , David Pan , Dennis Sylvester , Ashish Srivastava , Sarvesh Kulkarni, Pushing ASIC performance in a power envelope, Proceedings of the 40th conference on Design automation, June 02-06, 2003, Anaheim, CA, USA
[doi> 10.1145/775832.776032]
|
 |
8
|
Jingcao Hu , Youngsoo Shin , Nagu Dhanwada , Radu Marculescu, Architecting voltage islands in core-based system-on-a-chip designs, Proceedings of the 2004 international symposium on Low power electronics and design, August 09-11, 2004, Newport Beach, California, USA
[doi> 10.1145/1013235.1013283]
|
| |
9
|
|
 |
10
|
Chingwei Yeh , Yin-Shuin Kang , Shan-Jih Shieh , Jinn-Shyan Wang, Layout techniques supporting the use of dual supply voltages for cell-based designs, Proceedings of the 36th ACM/IEEE conference on Design automation, p.62-67, June 21-25, 1999, New Orleans, Louisiana, United States
[doi> 10.1145/309847.309872]
|
 |
11
|
|
| |
12
|
Synopsys inc., Galaxy design platform multi-voltage Design, available online, http://www.synopsys.com/products/power/multivoltage_bkgrd.pdf.
|
| |
13
|
Cadence inc., Cadence/TSMC Reference Flow 6.0.
|
| |
14
|
P. H. Madden, private communication.
|
 |
15
|
|
 |
16
|
Andrew E. Caldwell , Andrew B. Kahng , Igor L. Markov, Can recursive bisection alone produce routable placements?, Proceedings of the 37th conference on Design automation, p.477-482, June 05-09, 2000, Los Angeles, California, United States
[doi> 10.1145/337292.337549]
|
 |
17
|
|
 |
18
|
|
| |
19
|
A.B. Kahng and Q. Wang, "Implementation and extensibility of an analytic placer," IEEE Trans. Computer-Aided Design, vol. 24, pp.734--747, May 2005.
|
 |
20
|
Yongseok Cheon , Pei-Hsin Ho , Andrew B. Kahng , Sherief Reda , Qinke Wang, Power-aware placement, Proceedings of the 42nd annual conference on Design automation, June 13-17, 2005, San Diego, California, USA
[doi> 10.1145/1065579.1065791]
|
| |
21
|
J. A. Roy, S. N. Adya, D. A. Papa and I. L. Markov, "Min-cut floorplacement,", IEEE Trans. on Computer-Aided Design, to appear.
|
|